Square Filter Holder System Pro Kit (Filter Holder + 95mm Circular Polarizer + Square GND8 Filter + ND1000 (10 Stop) + 4 Filter Adapter Rings

Among several domestic and foreign companies offering square filters, I decided on this one because it is easy to put on and take off from the lens, it is thin in the front and back, and it comes with a C-PL filter
For C-PL filters, just open the lid and drop in from above. If you make a mistake in front and back, it will not fit.
The square filter has just the right amount of friction and doesn't feel like it's going to fall off.
Almost all metal, except for the four metal adapter rings and C-PL filter, the holder alone weighs 110g.
In terms of design, the overall impression is sophisticated.

I received the new X-PRO filter set today and have already tested its applicability in the apartment. A judgment on the quality of the filter glasses and the combinability in a shot I still deliver ... The supplied box holds the holder + adapter rings + CPL + ND 8/64/1000. At the drawstring you can pull out the compartments and then very conveniently remove the filters. The plastic filter frames are decently sharp-edged, but not unpleasantly so, and allow you to remove and handle the filter without having to touch the glass. The tabs on the frame also make it very convenient to pull the filters back out of the holder, especially in any order. I have ordered two empty frames in 100 X 150 on the manufacturer's site, which should take my graduated filters after receipt, which I have from another manufacturer. I am curious how well this will work. If it works out, I'll have a complete system for myself, with CPL, three ND filters and two graduated filters (Soft 0.9 and Reverse Soft 0.9). Sliding the filters in and out of the holder requires some force, but is neither awkward nor imprecise. This will then also allow the graduated filter to be aligned well. The handling of the CPL filter with the insertion bracket is great, the turning mechanism is a bit rough, but precise. Screwing the adapter rings onto the lens goes very well, the threads are cleanly made, nothing rubs. Attaching the holder to the adapter ring is also a pleasure and the existing locking screw is very welcome, as the holder can be rotated relatively easily on the ring. The handling of the system has already convinced me, with "only" two slots I can live well for my needs and I look forward to the first use, in the next few days, in the great outdoors and with cold fingers. I have so far worked with round screw filters and waived graduated filters, which I now want to change. I also looked at the system from Rollei (Mark II), which can not keep up with the X-PRO from K+F in handling. Everything very flat and fiddly, offers little surface for holding and joining the parts. Getting the polarizing filter or adapter ring out of the holder again is no fun and almost impossible with cold fingers. K&F has solved this much better. Who wants to use graduated filters is very well served with the X-PRO set, who only needs gray filters, I would advise a magnetic round filter set, whose diameter is well above its largest lens, which is even faster to use, is more compact and should then not darken with several filters in parallel.

I was really looking forward to it, everything is packaged beautifully and with high quality, so you can't say anything really great

Very high quality ND1000 K&F Concept square filter set consisting of glass filter, filter holder and lens adapters for the filter holder.

The package is divided into 3 parts:
1. a bag with metal adapter rings for lenses with different diameters.
2. a box with the filter and its leather carrying case.
3. a box with the filter holder.

The adapter rings allow us to put the filter holder on any lens, since we have a large number of different diameters. They are made of black metal and well made. With inscription on each ring of the corresponding diameter.

It is a square filter ND1000 100x100 mm and 2 mm thick. It allows us to remove 10 light levels to make long exposures in daylight perfect. In the example photo I posted, it is taken at noon at 30 ". I love the play that can be taken from this filter.

The filter comes in a leather case and is covered with tissue paper. The case is sturdy enough to protect it properly.
The glass is not easily marked by fingers and does not attract dust.

The filter holder is metallic, with the part where the filters rest being made of some kind of very hard plastic. They easily fit two 100x100 filters

I bought the rectangular filter set directly from K&F. Since I have worked with screw filters in the past and had the problem with vignetting when screwing several filters on top of each other, I have wanted to buy a rectangular filter set for a long time. Since the sets from NISI, Haida and other well-known manufacturers are very, very expensive, as a hobby photographer I was looking for a cheaper alternative. When I saw several reviews on YouTube, I decided on the K&F set, which is half the price of Haida and CO. I have absolutely no regrets about my decision. The filter holder is very valuable and well thought out. I particularly like how the polarizing filter is attached to the holder and how it can be adjusted using the small wheel. The filters themselves are made of optical glass and show no color cast and are also well coated. Another positive aspect is that the filters have a plastic frame with a tab. This allows the filters to be inserted and removed without annoying fingerprints. A bag is included to store and transport the holder and the filters in it. Also included are various adapter rings for different filter thread diameters. As a landscape hobby photographer, I no longer want to do without the advantages over screw-on filters. I give a clear purchase recommendation for amateur photographers and professionals too! I wasn't expecting such excellent quality for this price. It's amazing what K&F delivers here.

I loved the quality of the materials, all metallic. I looked at many kits but they were all plastic and this one caught my attention especially from the comments. The truth is that it was a success because any other similar kit does not fall under 300€.The optical filter nd1000 is made of glass and gives a very good quality. The only thing I noticed is that it loses a little saturation and the white balance is a little bluish, but when processing the RAW it is easily fixed. You increase the color temperature and saturation and you are done!!! (I use a Canon 80d + 16-35 f4 is). I imagine each lens will be different.Attached a few photos so you can see the difference with filter and without filter. Exposure time on the photo with the 30" filter.If you want to start in the world of filters, do not even think about it for this price. Excellent results.

When I received the product and tried it, I didn't like the 100 x 150 filter I had, so I asked the manufacturer if the filter frame was sold separately, and I received a reply the next day. I was in a hurry because the full text was in English, but I was able to purchase it safely by clicking the attached URL.

Had screw-on filters for years. Of course they work, but a plug-in filter is really practical, especially for landscape photography. I first bought the filter plug-in system from K&F (Nano x per row). Now have some filters. Filter and plug-in system highly recommended. I'm really excited. Goes fast, good quality and you can also leave filters on if you want to go a few steps further. I also like the frame around the filter. That way, greasy fingers don't get on the filter so quickly. Nothing wobbles. There is also a stylish filter bag.

Delivery time was faster than I expected, received them after a week from New Zealand. I love the packing style which brings to customers a professional attitude. Thank you for that and I will buy more products later on. :D

up until now, square filter holders from other companies have been expensive, and we have endured with SIOTI holders.
I also had an old K&F holder, but it is difficult to use C-PL.
That's where this product comes in. I bought a set of holder + C-PL + ND1000 for the time being, but it is well thought out. There is no vignetting even at 16mm with the Nikkor16-35mmF4, and there is no annoying color cast.
I'm a little worried about the C-PL's adjustment dial squeaking, but I have no complaints at this price with this content.
After that, I would like to see a frame that can be attached to the existing filters sold on the overseas official site, and a filter case that can hold about 6 to 8 filters with the frame attached.
~Addition~
I purchased a 100x150 frame from the US site of K&F. Existing filters can now be used, and full-scale operation is now possible.