Aluminium Camera Tripod with Transverse Center Column 72"/185cm 10kg/22lbs Load Capacity with 360 Degree Ball Head T254A3+BH-28L (S211)

SKU: KF09.079V1

  • 108.99
Overall Rating 4.8   70
Reviews
5
Camera mounting screw too long - otherwise good tripod
The 1/4 20 camera mounting screw is too long (or the plate is too thin) to properly secure on my Nikon Z bodies and grip accessories. When tightened all the way, the plate would spin. Easy fix was to add a washer. Otherwise excellent travel tripod with many options.
Camera mounting screw too long - otherwise good tripod Camera mounting screw too long - otherwise good tripod Camera mounting screw too long - otherwise good tripod Camera mounting screw too long - otherwise good tripod Camera mounting screw too long - otherwise good tripod
04/12/2021
Related Reviews
Frank Bowen
4
Would definitely recommend. Thanks
They do the job for my surround sound speakers. The screw for the mounting plate that holds speaker was a tad to big. Fixed that but over all they work well . Would definitely recommend. Thanks Amazon
02/02/2023
Peggy
4
Problem with sticky tape
I use a bedroom as my art studio. I have a little table in my closet so I needed more lighting in there. The provided sticky tape wouldn’t hold the light. I had to drill the metal plate into the wood for it to hold the light. (One screw in the middle). They should make the plate longer with holes at the ends for the option to screw into a wall, if needed. The screw in the middle does make the light bow a bit, but it’s functioning well.
17/04/2022
John
4
The screw is a bit too long for Canon EOS RP screw
The screw hole on Canon RP isn't tapped deep enough, or the screw on this mounting bracket is a bit too long. My workaround is the loose the retainer ring and plastic washer, then screw out the locking knob and place an extra washer between the base plate and locking knob.Other than this little modification the strap works well and hanging a 5lb rig isn't as bad as before!
03/04/2022
Mr. Smith
4
Yamaha NS-AW150BL
The speakers seem to perform like they're supposed to. I'd give them 5 stars if they came with the Mega mounting plate. It would've come in real handy since the speakers come with the Mega mounting Screws! This mounting plate enables you to rotate the speakers for adjustment. Although, the hole for the Mega mounting plate screw did come in handy for routing my speaker wire through the roof soffit.
14/11/2021
steven steven
5
Powerful magnet
The mounting system works exelent love it and it is easy to set up it has 4 magnet plate
13/09/2021
Tim and Sarah Davis
5
Great hard drive for PS3 super slim
I bought this for my kid's playstation 3 12 gb system that did not come with a hard drive. It was really easy to install with the MuchBuy hard drive mounting plate. I attached the hard drive to the plate and all I had to do was attach a screw. There were no software downloads I needed to do and it was pretty much plug and play. I used this youtube video for guidance: https://youtu.be/Bv6fFG1jl3Q
20/05/2021
G M Crabtree
4
The solar panel battery combo is good, but the mou
This is a compact combination solar panel and battery for game cameras. Works with my Spypoint LTE-Micro very well. However, the mounting system of screw plate and articulation ball joints is absolute awful. I had to double nut the base screw to even get it where I could mount the panel. Terrible, cheap, mounting.
13/04/2021
Dr. G. S. Mueller
5
A slimmer version of the original
Basically works the same as the original capture, but minus the screw that tightened or loosened the channel into which the plate slides. As this never served much purpose, unless perhaps you were trying to use the Capture with a non-standard plate, I have not missed it.It is a lighter, slimmer version and fits much more neatly onto a bad strap, without too much sticking out to the sides, and thus less lightly to catch onto things, or bang into stuff.I have noted elsewhere, and will here, that the new version of the plate does not have the flip-up finger tightening tripod screw, only a hex socket, thus one needs to carry a hex key if there is a need to remove or attach a plate while out and about. I happened to have enough of the old plates that I was able to cannibalize the tripod screws from those, and there is no problem using them with the new plates. One can of course also use the old plates with the new Capture.
20/03/2021