22" Magic Arm Clamp Kit, Overhead Desk Camera Mount, Long Articulating Friction Boom Arm for Phone, Action Camera, LED Light, Microphone, K&F CONCEPT

The truth is, I am very happy with this magic arm. It feels super sturdy, well made and of superior quality. It doesn't feel like a generic accessory, but rather like a really well thought out product with premium finishes.

For filming and photo shoots, it is perfect, because it allows you to adjust the angles well and work safely. I like this brand more and more: I had a very good experience with its filters and tripod, and now this magic arm once again confirms the great quality they offer for a very convenient price. More than recommended.

While at a volleyball tournament this thing came in very handy. There wasn’t a good place for the GoPro with the smaller clamp I have from K&F so pulled this one out and got the much higher shot I needed. I love how sturdy this is once you’ve adjusted it. Basically can set it up anyway you like with these ball
Clamp things. Once I’m done, it folds up nice and small to fit in my backpack with the rest of my junk.

I’ve been using this arm for my phone and action camera, and it works really well. The clamp feels strong, the joints tighten properly, and once I lock it in place it stays there.
I previously bought an iFootage arm that cost about twice as much, and honestly this K&F one as good as Ifootage. For lighter setups like a phone, action camera, small light, or microphone, it does the job without any problem.
It’s also easy to move around and adjust for different angles, especially for desk shots or quick filming setups. I wouldn’t put a heavy camera on it, but for the kind of gear it’s meant for, it’s solid.
Very happy with it. Good value for the price.

A bit smaller than I expected, but holds tight and is very adjustable. I use this to hold my smartphone for social media videos and it works very well. Sturdy construction and high quality parts. Very easy to install, move and adjust.

First of all, this is an extremely well made product with, in my view, exceptional materials. This thing can be turned every which way from Sunday. My photos show how ai I tend to use it, attached to my tripod so I can do face down videos but as shown in the add photos it attached to a thick countertop (mine is 2”) so you can do front facing. Super sturdy once all knobs are tightened. I would love to see this item with a 3rd arm but an exceptional product all around.

I own more magic arms than I can count without walking around the studio. I appreciate the length and clamp strength of this K&F arm, as well as the extra traction that the ball has. The locating pins are also a great addition that far too many arms forget to add. They're critical for monitors and anything that you want to hold steady. The thumb tightening is easy to us and very functional. A great value for the money compared to similar offerings. My one nitpick is that none of the added attachments have locating pin holes, as seen in my last picture. I feel like this was a missed opportunity. I also like the added design element of the foam grip. It's not necessarily needed, but it does make it feel better in the hand.

I didn't realize how much I needed this until after I found the perfect use for it. I work in a call center; we have the option of a headphone / microphone or a traditional handset for our phone system. I was loving it as a phone holder with the included spring clamp mount. I would frequently speak with family via FaceTime, so it was nice to not have to put the phone down when doing something else and having whoever I'm talking to stare at the ceiling. Then I found the best use for me. I use it to hold the telephone handset from sliding off the desk. This has become a priceless piece of gear for me. The size allows me to freely move it to wherever it needs to be. I don't have to worry about it sliding off, or the cord dangling below and getting caught on the chair. I may eventually try to 3D print a proper cup for the handset to rest in but for now I just lay it over the clamp and the bar.

I think this should hold up for quite some time, it's all metal construction including the knobs to tighten and loosen the clamp / pivots. there's a thin layer of some sort of foam around the bars to dampen any accidental dings or noises from contact with anything. It works great for what its intended for, as well as my newfound use for it.

I got this to mount my phone and small camera over my desk for top down shots... first thing I noticed is it feels all metal and heavy duty. The 22 inch length really makes a difference compared to short arms, I can reach the middle of my desk without moving the base...

Setup was simple, clamping on the desk and tighten the main knob... once you lock it, all the ball heads move together which is very convenient. You can get almost any angle you want, overhead, side, even low angle if needed...

The arm is strong for phones, action cams, small LED lights... I tested it with a light mirrorless and it holds but you need to really tighten it. If your desk is not super stable you will see some small vibration at full extension...

Build quality is good, mostly metal with rubber pads inside the clamp... the anti twist pins are nice touch and help keep things from rotating. For heavy DSLR fully extended I would not trust it long term, but for normal creator setup it works fine...

Pros

Long 22 inch reach gives real flexibility
All metal construction feels solid
Multiple 360 degree ball heads easy to adjust
Comes with phone holder and action cam adapter

Cons

At full extension small wobble if desk moves
Clamp needs strong tightening for heavier gear
Not ideal for heavy DSLR setups

Overall: For phone, webcam, action camera or small light this is very good value and practical, just dont expect cinema rig level stability...

It's a versatile mounting arm designed for content creators, photographers, streamers, or video setups. It clamps to a desk or similar surface and holds devices like phones, action cameras (e.g., GoPro-compatible), webcams, LED lights, microphones, small monitors, or similar gear up to about 1 kg (2.2 lbs) load capacity.

It features:
- A super clamp (grips flat surfaces up to 50mm thick or poles 20-60mm diameter).
- 360° adjustable dual/triple ball heads for flexible positioning.
- All-metal construction with non-slip silicone pads and foam padding on arms.
- Plus included adapters (phone holder, action camera mount).

It's about 22 inches long when extended, weighs approx. 0.48 kg, and has 1/4" and 3/8" threads for accessories.

Pros:
- Excellent 22" reach + 360° ball heads for flexible multi-angle/overhead positioning.
- Strong, durable, all-metal build with non-slip silicone pads, anti-twist pins, and secure super clamp (grips desks/poles well).
- Versatile design, with included adapters (phone holder, GoPro mount); great for content creation/streaming.
- Stable for light loads (2.2lbs) when tightened properly; good value vs. pricier brands.

Things to consider:
- Minor wobble/sag or drift possible at full extension, especially on flat desks or with heavier gear (effective capacity drops).
- Clamp may need occasional extra tightening for rock-solid hold; vibrations transmit more due to length.
- Not ideal for heavy DSLRs/large monitors at max extended reach.

This arm clamp kit is perfect for lightweight desk setups. If you need extended overhead flexibility, the versatility and durability, it's great for the price. I highly recommend to test your load if pushing limits, and weight limit does drop when it's fully extended out.

Although it's tagged for mounting cameras, this works perfectly for mounting an external microphone for my setup.

The machining and build quality are excellent and on par with other equipment I've purchased from this brand before. It's adjustability is great and I'm able to move it to the right position without any issues and most importantly - easily tighten the knobs without having to crank them down to stay in place. Once set, it doesn't move or shift around at all. You get a lot here for the price.

Overall, it's the perfect size for my desk and I'm able to place it amongst my monitors and laptop stand without getting in the way or making the workspace feel more cramped.

The included phone mount is nice and although I haven't used it yet for filming, it should do really well if I need it.