This camera strap mount is exactly as shown in the product photos and the parts are all good quality. It is very easy to use this to attach a camera to pretty much any shoulder strap IF the strap is big enough. There are three main pieces: a sleeve that wraps around the shoulder strap of your backpack; a rotating adapter that is permanently attached to the sleeve; and a camera mount that attaches to the camera and clips into the rotating adapter. At this point you can rotate the camera to square up the framing. Easy.

About the sleeve. The sleeve is made so it’s kinda square when opened up and has velco on two edges. Roll it into a circle so that the Velcro edges connect and it turns into a tube. As such, you can wrap it around a shoulder strap and connect the Velcro ends. The interior of the tube is a rubberized material that does not want to allow slippage. That’s where the problem comes in. The sleeve has to be tight on the shoulder strap because otherwise it will slip downward. So good luck if your shoulder strap is a one or two inch piece of webbing.

I think I’ll add another strip of Velcro so that I can Velcro the sleeve to the shoulder strap. Yeah, the strap will also need some Velcro. All the Velcro needs to do is keep the tube from sliding. Luckily, I’m already kitted for this because most of my gear is molle.