Suction Cup Mount for DJI Osmo Pocket 3, Car Windshield Window Dash Mount Holder for GoPro Hero 13/12/11/10/9 Black, DJI Osmo Action 3/4/5 Pro, Insta360 X5/X4 Accessories

The suction cup mount itself performs exceptionally well—it adheres firmly to flat, smooth surfaces and holds its position without slipping, even over time. The suction is strong and reliable, which makes it great for setups on windows, tiles, or other non-porous surfaces. The arm provides a short limited extension away from the mounting surface and limited rotational adjustability.

However, the included accessories designed for the DJI Osmo Pocket 3 are made of very thin plastic and don’t inspire much confidence in terms of durability.

One other downside is the limited flexibility in the mount arm—while it rotates, adjusting the exact angle can be a bit tricky, especially if you need more precise framing. You may find yourself wrestling with it a little to get the shot just right.

Despite those issues, for the price point, this is still a great value if you're looking for a basic, no-frills suction mount. Just don’t count on the accessories for long-term or rugged use.

This K&F Concept Suction Cup Mount for DJI Osmo Pocket 3, DJI Osmo and GoPro action cams is made well and a good value for the money. It came with different mounting options to accommodate just about any type of action camera. I like that the suction cup has the sticky rubber to adhere to the window better and hold tighter. The actuating arm can position the camera in multiple ways so you can get it positioned just right. For the price and quality, I recommend it.

Recently picked up an action camera. I wanted something that was versatile to mount my camera anywhere with out worrying about it falling off. I’m a fan of k&f concept products. So I figured I would give this a shot. This did not disappoint. I have another mount similar to this type of mount but I did not like the fact that it was only a suction cup, you had to make sure the surface was super clean and it felt weak. This mount has a sticky back along with suction cup to make sure it has a rock solid hold. It installs super easy, just stick where you want it and press the lever and it adheres. To remove it, just do it in reverse. Lift the lever and peel back the suction cup. It is super adjustable to get the right angle you are looking for. I highly recommend this product, you can’t beat it for the price.

I recently picked up the K&F Concept Suction Cup Mount for my DJI Osmo Pocket 3, and it’s another stellar product from a brand that consistently delivers. This mount is incredibly versatile, sticking securely to smooth surfaces like glass, metal, or my car’s windshield thanks to its 85mm suction cup, which combines vacuum suction with a layer of adhesive for extra grip. I was initially curious about whether the adhesive would leave residue, but so far, after testing it on my fridge and car dashboard, it’s come off cleanly every time. The suction is impressively strong, and I haven’t noticed any slipping, even with the weight of my camera. That said, I’d probably add a safety tether for peace of mind if I’m using it in a moving vehicle, just in case.

The mount comes with a plastic dust cover for the suction cup, which is a small but crucial detail. Don’t toss it! Without it, the adhesive can pick up lint and dirt in your camera bag, which would be a hassle. I wish K&F clarified whether the adhesive can be refreshed by washing, as some competitors’ suction cups allow, but I’ll test that when it gets dirty. The build is solid ABS plastic, which feels plenty durable for my needs, though I’d jump at a metal version if they made one. It’s lightweight yet sturdy, and the three adjustable joints make it easy to position my camera exactly where I want it. The toothed base at the suction cup adds extra stability, so I don’t have to overtighten it to keep my Osmo Pocket 3 or GoPro Hero 11 secure.

The mount’s compatibility is a big highlight. It includes a 1/4" screw adapter and an action camera adapter, making it work seamlessly with my DJI Osmo Pocket 3, GoPro, and even Insta360 cameras. The cold shoe on the side is a nice touch for attaching a light or microphone, which is perfect for content creators like me who need a compact, all-in-one setup. Installation is quick with a one-button press design, and removing it takes a bit of patience due to the strong adhesive, but it’s worth it for the secure hold.

Overall, this suction cup mount is a fantastic tool for filming on the go. It’s easy to set up, highly adjustable, and built to last. Whether I’m mounting it on my car, a window, or even a fridge for a quick test, it performs flawlessly. I’d highly recommend it to anyone needing a reliable mount for their action camera or DJI gear. Five stars!

This is a very well-made suction cup mount. We will be using it for our GoPro while traveling which will make it so much easier to use. It is very sturdy and easy to set up and attach to the windshield which is what it will be most used for. It is of good quality and value for the money.

I have a few similar mounts like this as I film a lot of outdoor adventure stuff. This suction cup is not the best, but it does the basic job that it needs to do. It’s easy to use and comes with all the accessories you need to mount your smaller cameras on it and get it to the angle that you need. The build of it feels right for the price, not premium, but not cheap material either. I would not trust this on the outside of my car, not saying that it can’t handle it, but I would definitely spend more on a stronger suction cup for those types of shots. It’s still a decent accessory for what it is though, especially for locked off shots.

This Suction Mount for DJI Osmo Pocket Action Cam by K&F Concept comes in a box decorated with images of the product and showing its peculiar characteristics.
Inside we find the support with 1/4 attachment, the 1/4 adapter -> Action Cam, the support frame for DJI Osmo Action to be applied to the Action Cam attachment, a user manual.
The support is very resistant, well built, with joints adjustable in 2 points.
The force of the suction cup, at least for now, is exceptional, the surface is as if covered with adhesive, which facilitates the air sealing of the edges.
Of course, over time it will lose this feature a bit, but a material similar to silicone will remain, which will help the suction cup to make a vacuum.
Tried it with a GoPro and it's a gem.
I would recommend it with my eyes closed even for heavier cams.

I hope this info is useful to you.

This suction cup mount is designed for securely mounting action cameras and camcorders such as DJI Osmo Pocket 3, GoPro Hero and Insta360 on smooth surfaces such as windshields and dashboards. It offers a versatile solution for shooting in cars or on glass surfaces.

Pros: Wide
compatibility with many camcorders and action cameras Strong and stable
suction cup even while driving Adjustable
joints to easily choose the shooting angle Quick
mounting and dismounting

Cons: It
does not adhere well on curved surfaces and does not work on porous surfaces
With intense vibrations it can lose stability if not fixed correctly

Conclusions:
A useful accessory for those who record videos in motion. Ideal for cars and smooth surfaces, it guarantees good grip with an excellent quality-price ratio, if used correctly.

To take pictures in a moving car, I chose this suction cup holder from K&F. Because I already have a number of products from this manufacturer in my photo equipment and have been quite satisfied with them so far.

At first glance, sturdy mount, can be easily adjusted in almost all directions and can be securely fixed. Good quality, except for plastic processing, see photos. The suction cup holds fairly well on straight surfaces, metal as well as glass, but does not hold if there are strong curves. A safety cable is an advantage here.

The suction cup is easy to install, simply remove the lock and pull the protruding rubber corner outwards and the holder is off. The adapter for DJI Pocket 3 fits perfectly, but I don't use the camera outside of the car, but on the inside ;-)

All in all, a good solution that could be improved in the suction cup area with a slightly softer rubber. The price/performance ratio is good and with my action cam it has worked quite well so far. However, I haven't driven faster than 60 km/h with it yet. Before I put on this bracket, be sure to clean the contact surface!

Thank you so much for taking the time to read my review. I hope that I was able to help a bit with this, including the photos.

This suction cup mount proves to be very valid for those who want a stable and adjustable solution for compact camcorders or action cameras or, as in my case, the osmo pocket 3.

The hold is surprisingly firm on smooth surfaces such as glass or metal, thanks to a slightly adhesive suction cup that improves grip.

It is easy to install and remove, and the locking mechanism conveys a good sense of security.

Compatible with most cameras thanks to the standard 1/4" screw, it is also equipped with an adapter for models such as DJI Pocket.

However, the plastic material and the ball joints do not convey the same strength as premium alternatives: for dynamic uses or outside a high-speed vehicle, it is best to be cautious.

Great for still shooting in a car, boat or from a window.

Good value for money for everyday and not too extreme use.