Secure Transaction
Portable CO Detector (Carbon Monoxide Detector), Alarm Temp/Humidity Detector with Magnetic Back, Built-in 1000mAh Battery for Home/Travel/Outdoor
Special
In Stock
- days
- :
- hours
- :
- min
- :
- sec
$55.99
$121.99
54% OFF
Free shipping worldwide
Description
- * 【HIGH-PRECISION 3-IN-1 CO DETECTOR】The portable 3-in-1 carbon monoxide detector can monitor the current CO concentration, temperature and humidity in the air in real time. Equipped with a high-precision sensor, the detectable CO concentration range is 0~500PPM, the temperature range is 32~122℉ (±2.7℉) / 0~50℃ (±1.5℃), and the humidity range is 20~80%RH (±5%RH). The data is accurate without delay, and real-time monitoring allows you to know the air quality of the environment at any time.
- * 【3 LIGHT INDICATIONS & CUSTOM ALARM VALUES】The carbon monoxide alarm can present 3-stage light indications according to the CO concentration in the air. 0~49ppm (green area flashing=safe), 50~99ppm (yellow area flashing=warning), 100~500ppm (red red area flashing=danger). By default, the CO alarm will sound an alarm when it reaches 50PPM. You can double-click the function key to customize the CO concentration alarm threshold.
- * 【LARGE CAPACITY BATTERY & FAST CHARGING】The MINI 3-in-1 CO detector has a built-in 1000mAh lithium battery for long-lasting power. Support QC2.0, PD3.0, AFC, USB C UFP (BC1.2 DCP CDP SDP) and other common fast charging protocols 10~65W charging. When the CO detector is not operated for 10 minutes, it will automatically turn on the energy saving mode (the brightness of the screen will be reduced), and you can click the function button to turn on the backlight.
- * 【OUTDOOR LANYARD & MAGNETIC SUCTION】The bottom of the carbon monoxide air quality monitor can be placed freely, you can put it on the table in the living room, kitchen, bedroom, etc. And it is equipped with a special outdoor lanyard, which is convenient for you to carry and use in outdoor activities such as travel, camping, picnic, and adventure. There is also a magnetic function on the back of the CO monitor, which can be attached to any metal area such as home appliances or cars.
$55.99
Shipping
Free shipping worldwide
Sale
Buy 100$-15$, 200$-30$, 300$-55$, 600$-120$(Labor Day Sale)
- The Mini 3-in-1 Carbon Monoxide Monitor monitors the current CO concentration, temperature and humidity in the air in real time. It gives you a better understanding of air quality and protects you and your family's health.
- The portable carbon monoxide alarm can present 3-stage light indication. By default, the CO alarm will sound an alarm when it reaches 50PPM. You can double-click the "function key" to customize the CO concentration alarm threshold. When the sound alarm sounds, you can press the "function key" to pause for 15 seconds. After 15 seconds, if the CO concentration continues to exceed the standard, the buzzer will sound again until the CO value is lower than the alarm value.
- The CO air quality monitor comes with an outdoor lanyard, the bottom is designed to be placed freely, and the back is added with a magnetic suction function, which can be used in a variety of indoor and outdoor scenarios.
- Name: 3-in-1 Carbon Monoxide Detector
- Color: Light Green
- Material: ABS+Metal
- Detection Gas: Carbon Monoxide (CO)
- Temperature Detection: Ambient Temperature
- Humidity Detection: Ambient Humidity
- Display Unit: CO: PPM, Temperature: ℃ / ℉, Humidity: %RH
- Carbon Monoxide Range: 0~500PPM (±10%)
- CO Sound Alarm Range: Default 50PPM (Adjustable Alarm Value)
- Temperature Range: 32~122℉ (±27°F) / 0~50°C (±1.5°C)
- Humidity Range: 20%~80%RH (±5%RH)
- Battery: 1000mAh Li-ion Battery
- Input: Type-C, DC5V~DC24V (Max), Support The Fast Charging Protocol With A Power Of 10~65W
- Fast Charging Protocol: QC2.0, PD3.0, AFC, USB C UFP (BC1.2 DCP CDP SDP) And Other Common Fast Charging
- Protocols Charging
- Storage Temperature: 14~158°F / -10~70℃
- Product Size: 2.99×2.75×1.18 in / 76×70×30mm
- Packing List:
- 3-in-1 Carbon Monoxide Detector PTH-10D ×1
- TYPE-C Cable ×1
- Outdoor Lanyard ×1
- User Manual ×1
| Specification | |
|---|---|
| Name | 3-in-1 Carbon Monoxide Detector |
| Color | Light Green |
| Material | ABS+Metal |
| Detection Gas | Carbon Monoxide (CO) |
| Temperature Detection | Ambient Temperature |
| Humidity Detection | Ambient Humidity |
| Display Unit | CO |
| Carbon Monoxide Range | 0~500PPM (±10%) |
| CO Sound Alarm Range | Default 50PPM (Adjustable Alarm Value) |
| Temperature Range | 32~122℉ (±27°F) / 0~50°C (±1.5°C) |
| Humidity Range | 20%~80%RH (±5%RH) |
| Battery | 1000mAh Li-ion Battery |
| Input | Type-C, DC5V~DC24V (Max), Support The Fast Charging Protocol With A Power Of 10~65W |
| Fast Charging Protocol | QC2.0, PD3.0, AFC, USB C UFP (BC1.2 DCP CDP SDP) And Other Common Fast Charging Protocols Charging |
| Storage Temperature | 14~158°F / -10~70℃ |
Reviews (18)
- All Reviews
- Image
Verified Purchase
Accuracy
Easy to use and feel confident in the results.
18/02/2024
Perfect for traveling
This compact carbon monoxide detector is great for traveling!! Now I don’t have to worry when I go to hotels as long as I have this detector with me!!
08/02/2024
Verified Purchase
Nice quality
Have yet to really test. But the build quality is very nice hopefully it last a long time
08/02/2024
Has a really nice display.
Has a nice display, battery lasts a long time and it is very nice to have peace of mind knowing I can check for carbon monoxide anywhere I go.
30/01/2024
Verified Purchase
Handy device
Used this for monitoring carbon monoxide around my home. Great value. Useful to have in my tool box.
25/01/2024
Looks good
It’s the first nice looking co detector I’ve seen. Easy to move into the garage when I’m working. Recommend!
15/01/2024
Verified Purchase
Dependable, compact early warning of CO
Lightweight (3.8 oz.). Long battery life. In my endurance tests the audible low battery alarm sounded after 103 hours. Thats over 4 full days with me bumping it up to full brightness 5 or 6 times a day. During that 103 hours it was always on and armed. After the first 5 minutes the screen dims to save power but the device is still detecting. Testing the alarm with auto exhaust, it responded within 2 seconds. The alarm detection threshold is adjustable from 25 ppm all the way up to 125 ppm. I liked that feature. The temperature was within 1 degree of a calibrated device and the humidity was with 3% of a calibrated device. Screen is difficult to read in full sun or while wearing polarized sun glasses. I use this for car camping and for taking naps at work in my car with the engine running. Nice backup if I'm going to be using propane or butane in the car. An absolute necessity for using a portable generator. Small engines make me uneasy. A gas powered push mower makes a little over ten times as much CO as my 3.8 liter Toyota V6.
11/01/2024
Peace of mind
I keep the unit next to my dog's bed in the garage near our propane heater. I know propane is supposed to burn clean, but you just don't know if you're not monitoring.
This unit feels durable. It's about the size of a hockey puck. Seems like the frame of the device is made of metal, the face and back look like injection molded plastic. Still, if you were to drop it, the plastic has a good chance of hitting the ground, perhaps breaking.
The CO detector picked up on a cigarette almost instantly, when held near the detector. I trust it works.
The only control is a single button. Don't lose the instructions. I found I only really needed to use the button for power on/off, and bringing the display out of power saving mode were it dims the still visible readings.
The included lanyard is cute, but essentially useless. The hook has a flawed design, and won't even clip onto a belt loop.
The battery seems to last a long time. So far, I'd say I've had it monitoring for about 10 hours and it still shows a full charge. I'll see how it holds up.
The temperature and humidity readings are interesting to know. You don't get those on all the different devices available. It's a nice bonus for me.
The display is bright and very easy to read. It dims after some time, still, it is readable. To turn on the bright display only requires a quick tap of the single button control.
The audible alarm is attention getting and fairly loud.
The magnet is not really strong enough to hold it to smooth metal such as the side of a heater. It will slide right down. Other metal surfaces, it seems to work ok on. Don't fully depend on the magnet to hold it in place 100% of the time.
The first one I received rattled, I exchanged it. The second one does not make noise when you move it around.
This unit feels durable. It's about the size of a hockey puck. Seems like the frame of the device is made of metal, the face and back look like injection molded plastic. Still, if you were to drop it, the plastic has a good chance of hitting the ground, perhaps breaking.
The CO detector picked up on a cigarette almost instantly, when held near the detector. I trust it works.
The only control is a single button. Don't lose the instructions. I found I only really needed to use the button for power on/off, and bringing the display out of power saving mode were it dims the still visible readings.
The included lanyard is cute, but essentially useless. The hook has a flawed design, and won't even clip onto a belt loop.
The battery seems to last a long time. So far, I'd say I've had it monitoring for about 10 hours and it still shows a full charge. I'll see how it holds up.
The temperature and humidity readings are interesting to know. You don't get those on all the different devices available. It's a nice bonus for me.
The display is bright and very easy to read. It dims after some time, still, it is readable. To turn on the bright display only requires a quick tap of the single button control.
The audible alarm is attention getting and fairly loud.
The magnet is not really strong enough to hold it to smooth metal such as the side of a heater. It will slide right down. Other metal surfaces, it seems to work ok on. Don't fully depend on the magnet to hold it in place 100% of the time.
The first one I received rattled, I exchanged it. The second one does not make noise when you move it around.
12/12/2023
Verified Purchase
Easy to read
Easy to read and accurate. Would recommend.
04/12/2023
Verified Purchase
As far as I can tell, it works
I bought this because my power bill was so high due to electric heat so I got a single head propane heater and I just wanted to make sure I didn't end up taking the big sleep if you know what I mean... The propane heater is not registering anything until it gets close to empty then it's around 15-20ppm, I took it to work with me and my forced air propane heater puts out 15-20 consistently, this thing will even pick up my car exhaust at the front door. Even a zippo lighter will set it off so I'm pretty sure it works. I also have carbon monoxide detectors in my house and they haven't gone off yet so I think I'm safe.
The picture is of me standing on the porch and reading CO from the car.
Edit. Just found out a wireless phone charger will set it off
The picture is of me standing on the porch and reading CO from the car.
Edit. Just found out a wireless phone charger will set it off
29/11/2023
FAQs
A
Thank you for contacting us. This portable CO gas monitor can freely set the concentration of the alarm value. The sound can be turned on or off The operation is as follows: In the test interface short press the button to turn off the sound (the default is to turn on the sound at boot), at this time the speaker pattern in the upper left corner of the screen disappears. Short press the button again to turn on the sound again."
Show More
A
Every time it's powered on, it goes through a little 20 second self-calibration routine. You can override it by pressing one of the buttons on the front of the unit.
Show More
A
No. This is not a high range tailpipe analyzer. This is an ambient air analyzer for worker exposure.
Show More
New Releases
Top Bestselling Products
-20%
-50%
-20%
