K&F Concept Electric Vaccum Mount for DJI Osmo Pocket 3

If you're accustomed to using suction mounts that require pumping as I am this electronic suction mount from K&F Concept will make mounting your Osmo Pocket 3 a breeze. Easily mounts just by pressing on to a smooth surface and the built in electric motor does the pumping for you. The expansion frame holds your OP3 and magnetically mounts to the suction mount. From my experience, the hold is extremely strong and I wasn't worried about the suction mount failing or the magnetic mount losing it's hold.The beauty of this mount is the ease of changing location. Just simply push the release button and reposition the mount as needed. The expansion frame magnet can also be rotated and positioned to give you a wide variety of shooting angles.Battery life is excellent. K&F states the battery can be used for around 25 days of normal use before charging. A red warning light will alert you when the battery reaches less than 25% capacity.Build quality for the suction mount and the expansion frame are excellent and appear to be able to hold up to long term use. The creative ways this mount can be used are unlimited and allows you to get angles that would otherwise be difficult if not impossible.One thing to be aware of, the magnetic ring has a rubber like washer on one side. Do not mount the ring on that side as the hold will not be strong and your camera may fall. Always mount with the metal side for the the strongest hold.

Awesome and convenient mount for dji Pocket 3.Suction is great and consistent and there’s no need for pumping. Attached super solid and strong too.Nice and small and compact and can fit in almost anything camera bag. Materials feel strong and durable as well, and it’s also very affordable. Makes for a really nice versatile Povket 3 setup for vloggers and content creators.

I have tried a lot of expansion adapters for the DJI Osmo Pocket 3, and this is easily my favorite one. It fits the camera perfect and has so many uses from a 1/4” mount on the bottom to the DJI action mount on the front. There’s a cold shoe on the side to attach lights or microphone to it and there’s also a cutout to access the SD card without having to take the mount off. There’s magnet on the back is super strong and easy to adjust.There’s magnet suction cup is just okay. I actually had more hope for it but it feels and sounds like a cheap suction cup from a bargain store. It does work and can hold the Pocket 3, but I don’t know how much faith I put into the suction cup. I would have preferred if it were a manual one where I definitely know it’s suctioned to the wall or wherever.It comes with a small case to store the suction cup as well as the small accessories for it. Overall, this is a great value and the best mount I’ve tried for the Pocket 3. It just would have been perfect if the suction cup it comes with was more reliable.

I was very skeptical about this at first and didn't want to add my Osmo to it, but I tested it before and felt confident in its durability and wasn't disappointed.I tried pulling if off the cabinet and it stayed put, so I added the Osmo to it. It fit perfectly, and felt secure and locked easily.Overall this is a gray product and functions as expected. The suction is strong and I definitely trust it on a flat surface. Keep in mind, it will not work on a textured surface, but I didn't expect that at all.

A good choice is an electric suction cup that grips with force simply by pressing with it on the surface where we want to adhere it. To take it off, simply press the button on the side. It charges quickly via USB C and its lifespan is quite long. It comes in a pack with a support for Osmo pocket 3 that has a magnetic system to be attached to the electric suction cup. This support is metallic unlike other supports that are usually made of plastic and fits perfectly with the osmo pocket without covering slots or buttons and protecting it at all times.

The build quality is excellent with a sturdy metal body and strong magnet, making it feel reliable for holding the Pocket 3. The suction system works well on smooth materials like glass or tiles, though it is not suitable for every surface. Installation is quick and simple, and the added 1/4" screw holes and cold shoe make it versatile for accessories. It feels very secure for indoor use, but I would not fully trust it on rough or moving surfaces.✅ Strong metal body and solid construction✅ Easy setup and quick mounting✅ Works well on glass, tile, and other smooth surfaces✅ Extra mounting options with screw holes and cold shoe❌ Suction cup limited to certain materials❌ Magnet feels less secure with extra weight or heavy movement⚠️ Bottom line: A well-built and useful mount for the DJI Pocket 3, best for indoor setups and smooth surfaces rather than extreme conditions.⭐ I hope my review has been helpful for you.

This is my first vacuum mount for my Osmo Pocket 3, and it has proved to be very good at what you need it to do; stay in place while holding your expensive camera gear. The MagSafe adapter that holds the pocket 3 is constructed from metal and fits perfectly to the design of the camera holding it very secure. The actual vacuum mount is MagSafe as well, so you’re not limited to using this with your pocket 3 which is quite nice.I don’t know if I would use this on the outside of a vehicle but inside on a windshield or anywhere else that has a smooth surface, this mount is a game changer.Simply press the vacuum seal up to the surface you’re mounting to, and the automatic trigger kicks in and seals the mount firmly. There’s a little button to press to break the seal so the operation is quite easy.

This K&F Concept Electric Vacuum Mount is the perfect companion for my DJI Osmo Pocket 3. The suction power is incredible—once it locks on, it stays put without any wobble or slipping, even during long shoots. I love the electric vacuum design; it gives me extra confidence compared to standard mounts and makes setup super quick and effortless.The build quality feels premium and durable, yet it’s lightweight enough to toss in my bag for travel. It’s very versatile too—whether I’m mounting it on glass, a car, or other smooth surfaces, it holds the Pocket 3 securely and gives me steady, shake-free footage every time.If you want peace of mind knowing your Osmo Pocket 3 is mounted safely and securely, this is absolutely the mount to get. Highly recommend!

A little intimidating at first, but after going through the set up, I really like this camera mount. You charge a battery inside an electric suction cup, which attaches by magnets to a circular ring that is part of the "expansion frame." This unit would be excellent without the electric motor. But, there's no manual pump to get in the way. And the suction feels very strong, like that cup is not going anywhere. Also, the magnetic mount allows adjustment of 360 degrees horizontal and 180 degrees vertical. Plus, you can adjust the Pocket 3 from a cell phone.

This was a game changer for my Osmo pocket 3. The magnet is super strong and this is super to use. It also comes with some extra adhesives in case you need. This will function in many different ways!