K&F CONCEPT Plastic Cold Shoe Mount Compatible with DJI Osmo Nano/Osmo Action 6, Action Camera Magnetic Quick Mount Holder, Tripod Adapter Hot Shoe Camera Connector

I recently snagged this cold‑shoe mount after upgrading to an Action 6 camera. I was already piecing together a rig and needed something that would keep the camera snug without adding extra height. This mount hit the spot perfectly.The quick‑release system is a highlight—once it’s cranked onto the rig and connected to the camera it feels tight and doesn’t require any elbow‑greasing. The built‑in magnet adds an extra layer of safety, so even if the release isn’t perfectly aligned, the camera still stays attached. The cold‑shoe portion is just as solid: a simple screw‑in loop locks the camera in place and you never have to worry about it slipping.What left me a little uncertain was the hex‑wrench tightening. It’s clever because it keeps the whole assembly low‑profile, but I’d have preferred a standard side‑screw that you could adjust on the fly without lugging a separate tool. In practice, I didn’t find it a deal‑breaker, but it’s a small point of friction if you’re constantly readjusting.All in all, if you’re hunting a reliable, compact cold‑shoe mount for an action camera, this is a solid pick. It does exactly what it promises, and you’ll likely find yourself reaching for it again and again.Pros- Tight, secure quick‑release attachment- Magnetic safety feature prevents accidental drops- Low‑profile hex design keeps the rig sleek- Easy screw‑in cold‑shoe for reliable lockingCons- Requires a hex wrench for adjustments—extra tool may be inconvenient if you’re constantly tweaking- Slight learning curve for the hex‑tightening if you’re used to standard side screws

Was surprised how tiny this is. But looks and feels solid quality. Easily screwed onto several different tripods I have. The little side grips to latch onto camera are reasonably easy to open. I goofed ordering this thinking it might also work with my similar but non-Nano camera. It doesn't but I'm confident it would work well as described with a Nano. So not deducting any stars.

This mount fits my Nano perfectly and makes for a very convenient way to mount it to my main camera for quick video. It’s manufactured very well and feels solid and durable, with the tilt feature taking just the right amount of force to angle it while remaining solidly in place when set. The cold shoe mount also works well and provides a secure attachment with the locking wheel. For the DJI Nano, it fits both the screen part and the camera part being interchangeable between the two which adds some versatility in setups. I don’t really have any complaints with it; it works as advertised, fits perfectly and is a high quality mount overall.

Excellent build quality, machined aluminum, and it feels rock solid. Mounts magnetically and locks in securely with the clips. Adjustable position and includes a hex wrench to tighten everything down. Once installed, it doesn’t move. Perfect if you want to add accessories without worrying about stability.

I was looking for an easy way to adapt my Osmo Nano to my camera setup for behind the scenes shots, and this has worked out perfectly. The magnetic quick release makes mounting fast and painless, and once it’s locked in, it feels very secure. I like that it gives me flexibility with angles while still keeping everything compact and clean on my rig. It’s been a reliable little adapter that does exactly what I needed without getting in the way. If you’re trying to add a Nano or action cam to your camera setup for BTS or secondary angles, this is an easy recommendation.

Nice mount for DJI OA6/Nano to attache to a cold shoe mount for BTS shots on your mirrorless or to mount to a cage with cold shoe capability. Very solid, well machined, and smartly finished. The all metal mount should hold up well as a travel accessory for your kit. K&F make some great accessories and this mount is no exception.

The magnetic mount from K&F Concept for the DJI Osmo Nano impresses me across the board. The fit is absolutely precise — the camera fits perfectly and without play in the holder.

The lockable angle, which can be adjusted cleanly and holds reliably, is particularly practical. Whether for vlogging or fixed setups: The position remains exactly as you set it.

The versatility is a big plus: The mount works both on the camera's hotshoe mount and via the tripod mount, which makes it extremely flexible.

Thanks to the combination of a strong magnet and additional clips, the camera is really bomb-proof. Even when moving or shaking, there is no shaking or uncertainty.

Overall, a high-quality, well-thought-out solution that delivers exactly what it promises. Clear purchase recommendation!

I'm a big fan of K&F Concept kit. It's well made, and their metal mounts are particularly impressive.

This mount, however, has a surprising frustration - though one that is not entirely K&F's doing.

DJI changed (improved) the quick release mounting system for their Osmo range with the introduction of the Osmo Nano. The same change persisted on the Osmo Action 6.

It's a subtle change from the earlier Osmo kit like the Action 5 Pro, Action 4 etc. and can usually be pretty much ignored - but not quite with this mount.

The change is that new style Osmo quick release mounts are reversible, where as previously the magnets would only allow you to attach a mount one way around.

This makes perfect sense for the likes of the Osmo Nano where the screen and camera are similarly reversible, making sure you can point the display in the direction you want and the camera in the direction you want.

And in every case I have tried, you can attach the new style mount to new and old Osmo kit either way around as well though you do have to fight the magnets a little on the older kit.

Every case, that is, except for the K&F Concept metal cage for the Osmo 360!

This mount fits the Osmo 360 itself OK - despite the Osmo 360 having the old style directional mount - but it absolutely refuses to attach to the cage!

What's more, other new style DJI QR mounts I have from other manufacturers DO fit the K&F Osmo 360 cage!

This is obviously a game of tolerances and this new style mount just misses out on being able to grab the slots in the base of K&F's own cage.

This issue aside, this is yet another handy mount.

All.ketal in construction, it feels sturdy and well made. The cold shoe foot and screw disc hold the mount in place securely and the QR mounts can be tilted through 180 degrees (maybe even slightly more).

The QR mount fits the Osmo Action 6 and Osmo Nano perfectly, as it is designed to do, and if you fight the magnets a little it also works with the Action 5 Pro and (uncaged) Osmo 360.

In the base of the shoe is also a 1/4" thread so you can attach this to selfie-stick/extension poles as well.

In black with the K&F signature orange details, it looks as good as it works. Just a shame about out fitting that cage.

I've been testing the K&F Concept cold shoe mount against a number of other similar mounts with my DJI Osmo Nano, and the K&F Concept product stands out as being incredibly well built. I've got several pieces of kit from this manufacturer and I've yet to use any that have been in anyway poor. They're usually a little bit more expensive than similar mounts, but they're usually worth that little bit of extra investment.

The mount is smooth in rotation but firm enough that it doesn't move. The clips grip firmly onto my camera and release smoothly when required. I'm able to mount my Nano onto the cold shoe of either my DSLR or video camera and capture additional footage while I work. It's an impressive bit of kit.