I don't think I have had anything from this brand that wasn't top-notch, high-quality equipment. This is no different. this is basically an action camera mount that can be fixed to glass and as such might be attached to a vehicle window or, equally, a house window which is what I used it for. It is very flexible and can be used in a variety of configuration including 1,2 or all 3 legs. If I was attaching this to a moving vehicle then I would definitely be using all 3 legs just to be on the safe side. There is also a length of chord included which doesn't appear to be mentioned in the instruction manual however I think it might be a good idea to tie one end of this to the mount and the other to something solid on the car like a roof rail. if, in the unlikely event, the mount comes loose then at least it won't fly off and become a hazard on the road. if you are off road then at least it will still be with you on the car.
Almost every component of this is made from solid metal, even the ball joints. It has the K and F concept signature colour coding of black and orange looks very cool in my opinion. The suction cups attach to glass by way of little pumps on the side of each one. They draw air out from underneath the clamp causing a vacuum and what feels like a very firm seal. Despite the limpet like hold, they are very easy to take off, simply by lifting the side of the rubber cup at a specifically labelled point.
I attached my Insta 360 Ace pro to this using a separate K and F concept adaptor which is not included in this kit but did fit just the same. I intend to use it to make some time lapse videos in the back garden.
My only small gripe is that the telescopic stick does not rotate about itself which means, when this is used in 3-legged configuration, you either need an adaptor the rotates or a you need tweak the stick mount itself in order to make sure the camera ends up pointing in the right direction. If using the 1 or 2 leg configuration you will have aa spare ball joint mount which allows flexibility in terms of angles.
This is quite a pricey piece of kit; however, it is very well designed and made and almost certainly worth the asking price.
Almost every component of this is made from solid metal, even the ball joints. It has the K and F concept signature colour coding of black and orange looks very cool in my opinion. The suction cups attach to glass by way of little pumps on the side of each one. They draw air out from underneath the clamp causing a vacuum and what feels like a very firm seal. Despite the limpet like hold, they are very easy to take off, simply by lifting the side of the rubber cup at a specifically labelled point.
I attached my Insta 360 Ace pro to this using a separate K and F concept adaptor which is not included in this kit but did fit just the same. I intend to use it to make some time lapse videos in the back garden.
My only small gripe is that the telescopic stick does not rotate about itself which means, when this is used in 3-legged configuration, you either need an adaptor the rotates or a you need tweak the stick mount itself in order to make sure the camera ends up pointing in the right direction. If using the 1 or 2 leg configuration you will have aa spare ball joint mount which allows flexibility in terms of angles.
This is quite a pricey piece of kit; however, it is very well designed and made and almost certainly worth the asking price.
08/05/2026
I use this car suction cup holder to film clip trips, which is very versatile.
The three suction cups are very stable and I can place on the hood, the side of the car and even the windshield, just check the surface to be smooth and clean.
his arm is a telescopic rod (32 to 110 cm), a safety strap and various adapters, which allow to mount different cameras, (my sports cameras and my small camcorder) as well as my smartphone.
The telescopic arm is useful when I want to widen the frame, but I avoid using a simple or double suction cup, as it says on the description. To film outside the car, I always use the strap so as not to take the risk of losing and damaging the body and I stay at low speed.
a double ball joint offers 360° adjustment: practical for finding the perfect angle, even on a slightly curved surface. The mount stays firm once locked, and the silicone pads limit vibration well.
I repeat myself, Before each use, I check both the cleanliness of the surface and I pump the suction cup until the light disappears.
I also check every two hours to avoid any loss of grip and do a few more push-ups.
Very good support, stable, flexible and reliable, especially as long as safety instructions are respected.
Very good workmanship, a very good value for money.
The three suction cups are very stable and I can place on the hood, the side of the car and even the windshield, just check the surface to be smooth and clean.
his arm is a telescopic rod (32 to 110 cm), a safety strap and various adapters, which allow to mount different cameras, (my sports cameras and my small camcorder) as well as my smartphone.
The telescopic arm is useful when I want to widen the frame, but I avoid using a simple or double suction cup, as it says on the description. To film outside the car, I always use the strap so as not to take the risk of losing and damaging the body and I stay at low speed.
a double ball joint offers 360° adjustment: practical for finding the perfect angle, even on a slightly curved surface. The mount stays firm once locked, and the silicone pads limit vibration well.
I repeat myself, Before each use, I check both the cleanliness of the surface and I pump the suction cup until the light disappears.
I also check every two hours to avoid any loss of grip and do a few more push-ups.
Very good support, stable, flexible and reliable, especially as long as safety instructions are respected.
Very good workmanship, a very good value for money.
06/05/2026
K&F CONCEPT Triple Suction Cup Car Mount Kit with Magic Arm and Extension Pole, Action Camera Mounts with Action Camera Adapter and Phone Holder Compatible with DJI OSMO, GoPro Hero 13, Insta360 X5
The K&F CONCEPT Triple Suction Cup Car Mount Kit is a sturdy and versatile option for filming with action cameras or smartphones on cars. Its three suction cups use a vacuum pump system that grips tightly to smooth surfaces like glass or painted panels, giving a secure hold even at higher speeds or on uneven roads. The build feels solid and stable, reducing wobble compared to lighter mounts. With the included magic arm and extension pole, you can easily adjust angles, tilt, or extend the camera for creative shots, while the dual ball head design adds flexibility. It comes with adapters for popular devices such as GoPro Hero 13, DJI OSMO, Insta360 X5, and also includes a phone holder, making it practical if you switch between filming with different gear. The quick-release pump system makes attaching and removing simple, though it works best on clean, flat surfaces. It’s not ideal for rough or dusty areas where suction may weaken, and it is bulkier than single suction mounts, but overall it offers strong stability and good value for its price range. For anyone wanting reliable car-mounted filming without breaking the bank, this kit is a smart choice.
The K&F CONCEPT Triple Suction Cup Car Mount Kit is a sturdy and versatile option for filming with action cameras or smartphones on cars. Its three suction cups use a vacuum pump system that grips tightly to smooth surfaces like glass or painted panels, giving a secure hold even at higher speeds or on uneven roads. The build feels solid and stable, reducing wobble compared to lighter mounts. With the included magic arm and extension pole, you can easily adjust angles, tilt, or extend the camera for creative shots, while the dual ball head design adds flexibility. It comes with adapters for popular devices such as GoPro Hero 13, DJI OSMO, Insta360 X5, and also includes a phone holder, making it practical if you switch between filming with different gear. The quick-release pump system makes attaching and removing simple, though it works best on clean, flat surfaces. It’s not ideal for rough or dusty areas where suction may weaken, and it is bulkier than single suction mounts, but overall it offers strong stability and good value for its price range. For anyone wanting reliable car-mounted filming without breaking the bank, this kit is a smart choice.
05/05/2026
I was so excited when i recieved my package , but when i was about to use it one suction doesnt work, i contact to cus y omer service and there were able to sent me a replacement hoping the replacement will properly work , i wanted to use this for my business travel on sunday
01/05/2026
I just received and unboxed my K&F CONCEPT 3 in 1 Suction Cup Mount Kit, and it has already exceeded my expectations. I haven’t taken it for a full production run yet, but after assembly and a quick test, I am absolutely thrilled to get this on the road.
The first thing you notice is the build quality; most of the major components are made of high-quality machined aluminum, giving it a very professional, "tank-like" feel that you just don't get with generic plastic mounts. Assembly was a breeze, and the triple 3-inch suction cup design forms a rock-solid triangular base that is supposed to deliver up to 44 pounds of horizontal holding force.
Here’s what I’m most excited about so far:
The Vacuum Pump System: This isn't just a simple lever; it uses a pump-activated vacuum system. You just press the pump until the white warning line disappears, and you know you’ve got a secure seal.
Curved Surface Flexibility: The dual ball head design allows for a 15° micro-adjustment at the base. This is a game-changer for getting a tight seal on slightly curved surfaces like a car’s hood or side panels.
Professional Magic Arm: The included magic arm is extremely flexible and features ARRI-style positioning pins to prevent your camera from shifting or twisting during high-vibration shots.
Complete Kit: It comes with everything you need right out of the box, including a phone holder, an action camera adapter for my GoPro/DJI gear, and even a dust cover to keep the suction cups clean for the next use.
I did a quick static test, and the suction is so strong it actually takes some effort to dislodge once you release the vacuum. If you’re looking for a reliable, professional-grade solution to capture first-person view footage from your vehicle, I would recommend this kit to anyone!
The first thing you notice is the build quality; most of the major components are made of high-quality machined aluminum, giving it a very professional, "tank-like" feel that you just don't get with generic plastic mounts. Assembly was a breeze, and the triple 3-inch suction cup design forms a rock-solid triangular base that is supposed to deliver up to 44 pounds of horizontal holding force.
Here’s what I’m most excited about so far:
The Vacuum Pump System: This isn't just a simple lever; it uses a pump-activated vacuum system. You just press the pump until the white warning line disappears, and you know you’ve got a secure seal.
Curved Surface Flexibility: The dual ball head design allows for a 15° micro-adjustment at the base. This is a game-changer for getting a tight seal on slightly curved surfaces like a car’s hood or side panels.
Professional Magic Arm: The included magic arm is extremely flexible and features ARRI-style positioning pins to prevent your camera from shifting or twisting during high-vibration shots.
Complete Kit: It comes with everything you need right out of the box, including a phone holder, an action camera adapter for my GoPro/DJI gear, and even a dust cover to keep the suction cups clean for the next use.
I did a quick static test, and the suction is so strong it actually takes some effort to dislodge once you release the vacuum. If you’re looking for a reliable, professional-grade solution to capture first-person view footage from your vehicle, I would recommend this kit to anyone!
27/04/2026
Very high quality for cost.
Moved it around my truck for several angles while doing some country road driving and never had an issue.
Moved it around my truck for several angles while doing some country road driving and never had an issue.
26/04/2026
This suction cup mount exceeded my expectations. It grips extremely well, even on the curved surfaces of my SUV, and stays stable while driving. I’ve used it with my Insta360 and the footage comes out great.
The build feels sturdy and reliable, with no wobble once locked in place. I’ve mounted it on the back and sides of the vehicle without any issues. It holds its position firmly.
Another great bonus is that it works inside the car too, attached to the windows for excellent interior shots. Versatile, strong suction, and easy to reposition.
The build feels sturdy and reliable, with no wobble once locked in place. I’ve mounted it on the back and sides of the vehicle without any issues. It holds its position firmly.
Another great bonus is that it works inside the car too, attached to the windows for excellent interior shots. Versatile, strong suction, and easy to reposition.
25/04/2026
The suction cup mount set with ball heads is primarily designed for action cameras. Since there are always newcomers here, or users who are not so familiar with brands from the camera, film and video industry, rest assured in advance that K&F CONCEPT is an established brand here and is also represented in the very demanding sector.
As a result, expectations for this set were correspondingly high.
And, conclusion first, were met positively in all respects.
The “K&F CONCEPT” camera suction cup mount impresses immediately and in every respect.
The silk-matt black coloring, or anodizing, makes the suction cup holders look very professional.
A matter of taste, of course, but the optical design with the matte black elements and orange parts looks very good. Visually, we are also catapulting us into the top league here.
But is the mount also functional? Yes
The main body of the suction cups consists of a solid, perfectly CNC manufactured and correspondingly heavy high-quality aluminum block.
Together with the very solid rubber suction body, each suction cup unit weighs a whopping 157 g.
The entire design is very sturdy and the screwing of the upper aluminum block to the bottom with screws looks very valuable.
It feels like the rubber suction surface is also made of solid material. There is a thick round lip at the bottom for a secure seal. This also works on slightly structured but dense surfaces.
The service does not raise any questions and is self-explanatory.
Put on the vacuum cleaner, then press the pump pen until the bright line is no longer visible. The vacuum builds up relatively quickly. However, up to 25 pumping movements are necessary for complete suction on a thick glass plate.
(If necessary, wet the surface or the edge of the rubber surface a bit with liquid). Pumping itself is naturally a bit difficult.
We can release the lifter by pressing on one of the rubber studs next to the inscription “OPEN” and pulling on the suction cup. In most cases, the suction lifter does not yet come off voluntarily, or simply. Due to the very solid thick rubber design of the suction cup, a lot of force has to be used here. Even though it seems strange, you should practice here at room temperature and in peace. It is best to press one of the knobs up strongly with both thumbs. Then it also comes off well and relatively quickly. Unfortunately, only 3 coffee-to-go lids are included to protect the suction cups.
The suction cup is equipped with threaded holes to attach a wide variety of equipment. There are ¼” standard screw fasteners at the top. The middle ones each have ARRI location pin holes for twist-proof mounting.
The specified holding forces can be fully trusted after some tests and experience. Depending on the surface and type of attachment, there is also a lot more to it.
Clean surfaces that are as flat, airtight and smooth as possible are of course a must here.
No matter where and how. I generally also protect suction cups, cameras, etc. with “safetys”. (These should be secure ropes, cords, or the like, adjusted in length). Thankfully, a 4 mm “paracord” rope of 2 m length is also included here.
The set also includes a very versatile, extremely sturdy magic arm in full metal design.
Here too, the functional design suggests experience and practice-oriented application. There are many Magic Arms, even very good ones. The flat, profiled design of the clamp arms is a special feature here. They offer extreme strength and stability.
¼” threaded screws and two spring-loaded safety pins are attached to the ball heads for mounting other accessories.
The balls, which are usually smooth but fitted with a sturdy rubber ring, contribute to the overall stability of the Magic Arm assembly. The large, ergonomic clamping lever also allows sensitive and very firm tightening.
Strangely enough, the “tension screw” (the orange lever) on this clamp cannot be pulled outwards against spring force and then changed in position so as not to interfere. On my similar K&F Magic arm with cold shoe mounts, the identical-looking lever can be adjusted 6 times in its position.
Even individually, a very universal, very high-quality, extremely stable magic arm.
Two of the suction cups are pre-assembled on the top with sturdy ball heads and connected to a metal bridge. Here, the suction cup heads can even be swiveled from 20° to 25° and can therefore also be attached to curved or inclined surfaces.
The bridge is made of 3 mm thick metal and is therefore sturdy. With this bridge, the two suction cups are mounted 187 mm apart. Certainly sufficient for the intended purpose. However, I would like a bridge with significantly more wingspan, also as a purchased part, which would also be adjustable, in order to be able to create even more stable triangle fastenings.
Since the ball mounts are embossed in the metal bridge, simple DIY solutions are unfortunately not possible.
The 35 mm — 110 mm long selfie stick consists of 5 telescopic elements. This makes it inherently more unstable, but also more compact than sticks with fewer elements. However, it is firmly tightened and installed very stable and relatively wobble-free. The solid metal design also contributes to stability and durability.
With the knurled locking rings, telescopic elements can be adjusted very firmly.
The other accessories are in no way inferior to the quality of the suction cups and the other main parts.
A simple mobile phone holder and an action cam adapter are also included.
These are rather simple parts but serve their purpose.
Very versatile as a set, as intended, or a two-person bridge, as well as as individual components. The quality and extensive functions are beyond question.
I can therefore share my full enthusiasm and recommendation here.
One of the very few products that receive 5 stars and one more as a bonus.
As a result, expectations for this set were correspondingly high.
And, conclusion first, were met positively in all respects.
The “K&F CONCEPT” camera suction cup mount impresses immediately and in every respect.
The silk-matt black coloring, or anodizing, makes the suction cup holders look very professional.
A matter of taste, of course, but the optical design with the matte black elements and orange parts looks very good. Visually, we are also catapulting us into the top league here.
But is the mount also functional? Yes
The main body of the suction cups consists of a solid, perfectly CNC manufactured and correspondingly heavy high-quality aluminum block.
Together with the very solid rubber suction body, each suction cup unit weighs a whopping 157 g.
The entire design is very sturdy and the screwing of the upper aluminum block to the bottom with screws looks very valuable.
It feels like the rubber suction surface is also made of solid material. There is a thick round lip at the bottom for a secure seal. This also works on slightly structured but dense surfaces.
The service does not raise any questions and is self-explanatory.
Put on the vacuum cleaner, then press the pump pen until the bright line is no longer visible. The vacuum builds up relatively quickly. However, up to 25 pumping movements are necessary for complete suction on a thick glass plate.
(If necessary, wet the surface or the edge of the rubber surface a bit with liquid). Pumping itself is naturally a bit difficult.
We can release the lifter by pressing on one of the rubber studs next to the inscription “OPEN” and pulling on the suction cup. In most cases, the suction lifter does not yet come off voluntarily, or simply. Due to the very solid thick rubber design of the suction cup, a lot of force has to be used here. Even though it seems strange, you should practice here at room temperature and in peace. It is best to press one of the knobs up strongly with both thumbs. Then it also comes off well and relatively quickly. Unfortunately, only 3 coffee-to-go lids are included to protect the suction cups.
The suction cup is equipped with threaded holes to attach a wide variety of equipment. There are ¼” standard screw fasteners at the top. The middle ones each have ARRI location pin holes for twist-proof mounting.
The specified holding forces can be fully trusted after some tests and experience. Depending on the surface and type of attachment, there is also a lot more to it.
Clean surfaces that are as flat, airtight and smooth as possible are of course a must here.
No matter where and how. I generally also protect suction cups, cameras, etc. with “safetys”. (These should be secure ropes, cords, or the like, adjusted in length). Thankfully, a 4 mm “paracord” rope of 2 m length is also included here.
The set also includes a very versatile, extremely sturdy magic arm in full metal design.
Here too, the functional design suggests experience and practice-oriented application. There are many Magic Arms, even very good ones. The flat, profiled design of the clamp arms is a special feature here. They offer extreme strength and stability.
¼” threaded screws and two spring-loaded safety pins are attached to the ball heads for mounting other accessories.
The balls, which are usually smooth but fitted with a sturdy rubber ring, contribute to the overall stability of the Magic Arm assembly. The large, ergonomic clamping lever also allows sensitive and very firm tightening.
Strangely enough, the “tension screw” (the orange lever) on this clamp cannot be pulled outwards against spring force and then changed in position so as not to interfere. On my similar K&F Magic arm with cold shoe mounts, the identical-looking lever can be adjusted 6 times in its position.
Even individually, a very universal, very high-quality, extremely stable magic arm.
Two of the suction cups are pre-assembled on the top with sturdy ball heads and connected to a metal bridge. Here, the suction cup heads can even be swiveled from 20° to 25° and can therefore also be attached to curved or inclined surfaces.
The bridge is made of 3 mm thick metal and is therefore sturdy. With this bridge, the two suction cups are mounted 187 mm apart. Certainly sufficient for the intended purpose. However, I would like a bridge with significantly more wingspan, also as a purchased part, which would also be adjustable, in order to be able to create even more stable triangle fastenings.
Since the ball mounts are embossed in the metal bridge, simple DIY solutions are unfortunately not possible.
The 35 mm — 110 mm long selfie stick consists of 5 telescopic elements. This makes it inherently more unstable, but also more compact than sticks with fewer elements. However, it is firmly tightened and installed very stable and relatively wobble-free. The solid metal design also contributes to stability and durability.
With the knurled locking rings, telescopic elements can be adjusted very firmly.
The other accessories are in no way inferior to the quality of the suction cups and the other main parts.
A simple mobile phone holder and an action cam adapter are also included.
These are rather simple parts but serve their purpose.
Very versatile as a set, as intended, or a two-person bridge, as well as as individual components. The quality and extensive functions are beyond question.
I can therefore share my full enthusiasm and recommendation here.
One of the very few products that receive 5 stars and one more as a bonus.
22/04/2026
Currently priced at £99.99 at time of review
This review is for the K&F CONCEPT Triple Suction Cup Car Mount Kit with Magic Arm and Extension Pole, Action Camera Mounts with Action Camera Adapter and Phone Holder Compatible with DJI OSMO, GoPro Hero 13, Insta360 X5….
Arrives nicely boxed contents all secure…
This suction mount is well made and very sturdy…the triple suctions holds really well and sturdy.
The arm has an extension pole and moves in and out very smoothly….
The adapter makes it very easy to switch devices….
Insulation was quick and easy to set up….
This is a solid piece of equipment and looks tuff enough to last a long time
Looks very professional…
Reduces wobbles and makes camera more sturdy and secure
Found this very easy to put in place and remove when not needed
Very sturdy and secure
Well made and safe
Happy to recommend
This review is for the K&F CONCEPT Triple Suction Cup Car Mount Kit with Magic Arm and Extension Pole, Action Camera Mounts with Action Camera Adapter and Phone Holder Compatible with DJI OSMO, GoPro Hero 13, Insta360 X5….
Arrives nicely boxed contents all secure…
This suction mount is well made and very sturdy…the triple suctions holds really well and sturdy.
The arm has an extension pole and moves in and out very smoothly….
The adapter makes it very easy to switch devices….
Insulation was quick and easy to set up….
This is a solid piece of equipment and looks tuff enough to last a long time
Looks very professional…
Reduces wobbles and makes camera more sturdy and secure
Found this very easy to put in place and remove when not needed
Very sturdy and secure
Well made and safe
Happy to recommend
19/04/2026
I use this regularly, and it performs really well. The triple suction cups hold firmly on smooth surfaces, and the magic arm with extension pole gives excellent flexibility for positioning cameras at different angles.
It works perfectly with my GoPro, DJI OSMO, and phone, and the adapter makes switching devices quick and easy. The build feels solid and durable, so I feel confident even on bumpy drives or higher-speed shots.
It can take a moment to balance heavier setups, but overall, it’s a high-quality, versatile mount that’s great value for anyone shooting action footage.
It works perfectly with my GoPro, DJI OSMO, and phone, and the adapter makes switching devices quick and easy. The build feels solid and durable, so I feel confident even on bumpy drives or higher-speed shots.
It can take a moment to balance heavier setups, but overall, it’s a high-quality, versatile mount that’s great value for anyone shooting action footage.
18/04/2026