I use this car suction cup holder to film clip trips, which is very versatile.
The three suction cups are very stable and I can place on the hood, the side of the car and even the windshield, just check the surface to be smooth and clean.
his arm is a telescopic rod (32 to 110 cm), a safety strap and various adapters, which allow to mount different cameras, (my sports cameras and my small camcorder) as well as my smartphone.

The telescopic arm is useful when I want to widen the frame, but I avoid using a simple or double suction cup, as it says on the description. To film outside the car, I always use the strap so as not to take the risk of losing and damaging the body and I stay at low speed.

a double ball joint offers 360° adjustment: practical for finding the perfect angle, even on a slightly curved surface. The mount stays firm once locked, and the silicone pads limit vibration well.

I repeat myself, Before each use, I check both the cleanliness of the surface and I pump the suction cup until the light disappears.
I also check every two hours to avoid any loss of grip and do a few more push-ups.

Very good support, stable, flexible and reliable, especially as long as safety instructions are respected.

Very good workmanship, a very good value for money.

The product comes packaged in a cardboard box where the individual components are housed inside in spaces obtained from the pre-shaping of a foam divider. A very technical packaging for an equally specialized item. In fact, we are faced with a car support made entirely of metal, materials and weight immediately convey a feeling of excellent perceived quality.
When assembling the product, this first impression is further confirmed by the details that make up and characterize each individual component: the ball joints are adjusted and locked by an oversized clamping screw that allows them to be tightened or loosened with minimum effort; at the ends of the joints, the threaded screws for attachment to the other elements of the kit are accompanied by two small steel pins that act as a template for a very precise one-sided attachment and prevent accidental loosening. But it is above all the 3 suction cups equipped with a pump system for a strong and above all safe tightening that decree the excellent technical level of the item in question.
Mounted on the roof of the car, the system turned out to be very stable and safe, and wind and vibrations do not affect its positioning in any way.
The price is certainly demanding for a car holder, but I find it justified by the high-level characteristics described above, even if given the need to disassemble the kit when not in use to store the individual components I would have preferred a plastic case to be supplied instead of a simple cardboard packaging.

I ordered the kit for myself to capture new perspectives while driving with the Insta360 — and I'm really impressed. The three suction cups are incredibly tight. The pumping system provides immediate safety: Remove the white line and the thing is bomb-proof. That is exactly what I need when I use the camera on the outside of the car.

The telescopic rod and articulated arms offer many ways to adjust the angle perfectly. For creative perspectives, this is great — front, side, low across the street or slightly elevated. The workmanship looks high-quality, nothing wobbles, and the whole system feels well thought out.

I stick to the recommendation not to go faster than 80 km/h, but the mount is absolutely stable in this area. Even with smaller bumps, nothing has been resolved. It's perfect for action cams; I wouldn't use it for heavier cameras, that would be too risky for me.

This set is just right for my driving pictures: sturdy, flexible and very well made. A clear recommendation for anyone who wants to take auto shots to a higher level.

This is ridiculously high quality and something I dare say you can film a movie with if you need to film a car chase with your action cam!

It’s a solid piece kit that mounts on your car. K&F Concept makes incredible kit and this is no exception. The suction cups use a vacuum system to adhere as tightly as possible, to be on the safe side I’d mount this on as flat of surface as possible and make sure the surface is clean.

It comes with adaptors for all the action cams listed and so far, everything they promise in this product listing is true.

Really good value for money considering the professional grade of this mount.

I was pleasantly surprised by this set from K&F Concept. The triple suction cup construction ensures an extremely secure grip and gives you a good feeling, even when the camera is attached to the outside of the vehicle. This is particularly ideal for road trips or dynamic driving pictures. The combination of suction cups, ball head and telescopic rod opens up many opportunities to capture creative perspectives.

The workmanship looks high-quality, everything fits neatly and stably. The 360 degree ball head allows very precise adjustments, so that you can easily adjust the camera even when assembled. The telescopic rod is particularly practical, which is not only suitable as an extension for the car, but can also be used as a full-fledged selfie stick, compatible with GoPro, Insta360, smartphones and much more.

You should take the manufacturer's instructions seriously and only use the suction cup on smooth, solid surfaces and regularly check whether it is still tight. At extreme speed or when the rod is fully extended, the risk would be too high for me, but when used properly, the system works perfectly.

For anyone who wants to take exciting driving pictures or is looking for a flexible mount for action cameras and smartphones, this set is a very good choice.

This Triple Suction Cup Car Mount Kit from well-known brand K&F concept represents amazing value for money considering what you get. It essentially comprises three suction cups with brackets and the extendable pole, amd the unit is fully adjustable to fit just about any vehicle It is not without it's limits, and speed awareness is definitly in order, but the cups attach to just about any flat and hard surface well, and are of the pump close variety, rather than the twist lock. The ovberall quality is stunning and as good as we have come to expect from K&F Concept. And for less than £100 it's hard to beat.

The triple suction cup system for vehicles was well packaged and delivered quickly. As soon as you unpack it, you can tell that this is not a wobbly plastic toy. The materials are robust and feel extremely high-quality, which makes devices that I attach to the outside of the car at 80 km/h a good feeling.

My everyday life as an amateur director:
I am a passionate road trip fan and am constantly trying to take epic pictures of my trips — my personal “road trip masterpieces”. This multifunctional triple suction cup system is perfect for that. I primarily use it to mount my action camera on the outside of the hood or on the side of the window. Assembly is surprisingly easy. I press the three suction cups onto the smooth surface and pump until the small white line disappears — then I know that the grip is bomb-tight and that the suction power does not loosen.

The shock on the country road:
Last week I was on my way to the coast. I had the camera mounted on the outside of the fender to get a dynamic shot of the road. I also used the telescopic extension rod for this, but as a precaution I did not fully extend it, as the instructions recommend. I was only traveling at the allowed 80 km/h, but then there was a section with nasty, undulating bumps that you would expect on a field rather than on a country road. My passenger screamed for a minute! I thought that was it for the camera and mount. But the thing held. It didn't move a millimeter. The sturdy construction and vacuum pump system ensured that the mount remained surprisingly stable, without the typical wobbling that is known from lighter holders. That feeling of security, even when it rumbles, is priceless.

What I particularly like:
The versatility is fantastic. Thanks to the 360° rotatable ball head and the 15° angle clamp, I can make precise angle adjustments, regardless of whether I want a frontal, side or ultra-wide angle view. And I appreciate the strength of the joints; they're made of solid metal and the orange anodized buttons are clearly visible. I can also remove the extension rod and use it as a selfie stick, making the set a real all-rounder — compatible with action cameras and smartphones. The entire kit is a fair price-performance ratio, considering how much similar individual components would cost.

Minor criticism:
Although the system can carry up to 3 kilograms, the maximum load capacity with the extension rod is limited to 1 kg. If I want to use my heavier DSLR camera (which is technically feasible) together with the pole, I have to be extremely careful. And of course I always have to stick to the top speed of 80 km/h when driving, which is annoying on the motorway, but safety comes first. That is the compromise that must be made for this professional stability.

This mount surprised me in a good way. The suction cups latch on firmly and the pump indicator makes it easy to see when they are fully secured. Once attached, the setup stays steady and doesn’t shift around, even on slightly curved areas like the hood. The adjustable joints make it simple to dial in the angle you want. I liked that the center connection can tilt a bit to match curved surfaces, which makes positioning much easier. The extension pole feels solid and gives some extra reach for higher or wider shots without feeling flimsy. Switching between cameras and a phone is quick with the included adapters. It works well for inside or outside the car, and I didn’t run into any unwanted vibration while driving. Highly recommend for anyone who is looking to shoot unique interior and exterior shots while driving, a must-have for content creators!

I have had the opportunity to use this mount with different cameras (GoPro, Insta360 and smartphones) and I must say that K&F Concept has done a great job of combining stability, versatility and ease of use.
The structure with three 3-inch suction cups guarantees a really solid grip: once fixed, it does not move a millimeter, even on slightly curved surfaces. The security it offers when shooting in the car is remarkable, and gives the peace of mind of being able to record even at high speeds without vibrations and without the risk of the support coming off.
The 360° magic arm is a very convenient feature: it allows you to orient the frame with millimeter precision, both for front, side or interior shooting. The adjustable telescopic rod, then, adds additional flexibility, making the setup perfect even for more creative angles or for obtaining a professional “car-rig” effect.
The compatibility is great: GoPro, Insta360, action cameras from other brands and even smartphones (with adapter) can be mounted without problems. The materials are robust and give the feeling of a product designed to last a long time.
It is an ideal support for those who want dynamic, clean and stable self-shooting without having to resort to much more expensive solutions.
Highly recommended for videomakers, creators or anyone who wants to take their car footage to a higher level.

K&F CONCEPT Triple Suction Cup Car Mount Kit with Magic Arm and Extension Pole, Action Camera Mounts with Action Camera Adapter and Phone Holder Compatible with DJI OSMO, GoPro Hero 13, Insta360 X5

The K&F CONCEPT Triple Suction Cup Car Mount Kit is a sturdy and versatile option for filming with action cameras or smartphones on cars. Its three suction cups use a vacuum pump system that grips tightly to smooth surfaces like glass or painted panels, giving a secure hold even at higher speeds or on uneven roads. The build feels solid and stable, reducing wobble compared to lighter mounts. With the included magic arm and extension pole, you can easily adjust angles, tilt, or extend the camera for creative shots, while the dual ball head design adds flexibility. It comes with adapters for popular devices such as GoPro Hero 13, DJI OSMO, Insta360 X5, and also includes a phone holder, making it practical if you switch between filming with different gear. The quick-release pump system makes attaching and removing simple, though it works best on clean, flat surfaces. It’s not ideal for rough or dusty areas where suction may weaken, and it is bulkier than single suction mounts, but overall it offers strong stability and good value for its price range. For anyone wanting reliable car-mounted filming without breaking the bank, this kit is a smart choice.