This mount is awesome, so versatile there is no direction you can't make it point. No instructions so it took me a minute to figure out that the middle screw tightened the whole thing. When it's tight, it's tight AF. MYy Harley won't rattle it.
16/11/2025
Smaller than I thought, but honestly that makes it perfect for what I need. The material and build quality are beyond expectations — solid 11/10 (not a typo). The clamps are just as impressive: sturdy, well-made, and super easy to attach. Couldn’t be happier with this purchase!
14/11/2025
I am going to be finding so many ways to use this magic arm to mount lightweight things to tripods and light stands. So far I have used it hold a phone clamp to display my digital camera's phone app for wireless tethering and holding a small LED panel in any orientation I need. With the knob loose, you can freely position it with any degree of flexibility. With the single knob tightened, all the pivots grip and nothing moves. The clamp and arm feel well-built and should hold up to use.
13/11/2025
The arm and clamp work solidly. I mainly use this for mounting a 5" BlackMagic Video Assist (approx. 15 oz), and it’s great for freely adjusting the monitoring angle. One feature I like is that the knob can lock two arms and two screws all at once with a single action. The clamp securely holds both the arm and monitor onto a tripod. When needed, I can mount the monitor directly onto a camcorder using just the arm—without the clamp—which is neat. One tip: make sure the two mounting screws are properly seated in the arm slots to prevent the attached monitor from rotating.
12/11/2025
This is some heavy duty stuff. I always liked K&F products, and I needed something to hold my phone with my camera and this was the perfect 3rd arm. When I received it, I was surprised by the weight, they used some good amount of metal on this, I can articulate the arms in many ways and directions. The clamp is also heavy duty, I can clamp it to my desk if needed. It very easy to setup and use. The middle joint controls the position as well as the ball joint at both ends, once tight it doesn't go anywhere. I can mount this on my car and drive with it and won't go anywhere. Really has lot of potential for this device.
11/11/2025
There's always some funky angle or weird position I'm trying to use to capture a shot of something, and this thing is definitely a winner. I have a small tripod with the standard camera-sized screw in, and this fits right into it. The clamp it comes with attaches firmly with zero wiggle at all, and it clamps down tight! When you tighten down that central handle, both ends of this become immovable - at least for me. I have nothing to complain about for this at all - and the clamp attachment will allow it to attach to just about anything!
10/11/2025
I was not sure what to expect with this camera mount, but I really like it! It is lightweight, compact, and fast to set up once you get the hang of it. The key is that you have to kind of hold the mount in the rough position of where you will want it, as you tighten down the knob at the main pivot point. As you tighten that, all the joints will simultaneously begin to tighten as well; then you can fine-tune and finish tightening it in place. Once you get the hang of it, it is super quick. I'm looking forward to getting a lot of use out of this versatile little mount!
09/11/2025
I’ll admit, I was skeptical when I read the product description. I’ve never seen an articulated arm where tightening the central joint simultaneously locks the swivel heads at both ends — usually, you'd need to fuss with multiple knobs or tension points. But after using this arm for a while, I can say it really does work as described — and it’s kind of an engineering marvel.The build quality is excellent. It’s made of aluminum and steel, and the machining feels extremely precise — nothing wobbly or loose. Once tightened, everything locks down securely, including the ball joints at either end. It gives you the flexibility of a magic arm with the stability of a fixed bracket.We’re currently using it to hold a light above a computer monitor for filming short video clips, and it handles that task effortlessly. Honestly, I wouldn’t hesitate to use it to support a small camera, monitor, or other gear in a home or studio setting.If you’re looking for a reliable, well-built friction arm, this one punches above its weight.
08/11/2025
There's huge value in a sturdy and flexible clamp and magic arm for your phone and camera accessories. The K&F Concept Magic Arm with Super Clamp is exactly that, a reliable mount for all sorts of accessories.The 1/4-20 thread on each end is universal for most camera accessories. This allows me to attach phone mounts, lights, and so much more. This unit is strong enough to hold my full DSLR. My DSLR kit exceeds the 2KG rated limit, so I won't keep it there long, but it did hold it, good work!The magic arm locks into place very securely, and is very easy to manipulate into the exact position I need. The clamp is decent as well. It tightens down hard and holds well, thanks to the rubber pads. The 1/4-20 and 3/8-16 threaded holes are ready for any attachment.While ideal for camera accessories or holding your phone, I also like attaching another clamp and using this magic arm in the shop. This clamp and arm are sturdy enough to hold wood or steel in place while fabricating. I'm impressed. I think it's worth the money, a good value clamp and arm setup.
07/11/2025
Good utility Magic Arm from K&F. I typically look to K&F for filters on my mirrorless and action cameras but they have produced some very well made accessories beyond their filter offerings. Seems that their quality extends throughout their line. This Magic Arm is a machined and finished well and holds cameras, lights, microphones with ease. I would suggest that you do not load the arm to the 4.41lb. limit. I think a load of somewhere between 2-3 lbs. is the maximum load I would attempt with the arm. It takes a lot of torque to wrench down the thumbscrew to secure higher loads and I would not recommend pushing it with arms of this nature, this concern is not specific to this K&F product but to all arms of this type. So small mirrorless, phones, action cameras, small lights, microphones are not an issue with this mount.
06/11/2025