I have a Blackview rugged smartphone that weighs 450 grams, used a week on vacation in the Canary Islands, never detached from the car glass and never pumped the suction cup to strengthen the seal except during installation and it was subjected to significant temperature changes, when I mounted the phone to use the navigator I tried to move it on purpose and it is beautiful and robust, I am very satisfied with both the construction quality and the practicality in use
27/01/2026
The suction cup from K&F reliably holds even medium-weight cameras and thus enables exciting perspectives.
The operation is pretty simple and self-explanatory. Pumping continues until the mark is no longer visible and a decent vacuum presses the suction cup firmly against the window.
A smartphone, camera or similar can now be attached to it. A bit of trust is also required, but so far everything has always been very reliable with me. Even on the outside of a car.
The operation is pretty simple and self-explanatory. Pumping continues until the mark is no longer visible and a decent vacuum presses the suction cup firmly against the window.
A smartphone, camera or similar can now be attached to it. A bit of trust is also required, but so far everything has always been very reliable with me. Even on the outside of a car.
25/01/2026
Excellent support for K&F cameras and action cameras. It is a well-made suction cup support, with a joint capable of being adapted to any configuration and to which devices of any type can be connected as long as they have a 1/4 screw.
Excellent materials, I would avoid using SLRs but with small action cameras or portable LED lights it can be an excellent ally.
Excellent materials, I would avoid using SLRs but with small action cameras or portable LED lights it can be an excellent ally.
23/01/2026
The suction cup holder looks very well made.
It sticks best on smooth and clean surfaces. It holds securely even when I attach heavier cameras to the mount.
The two ball heads make it particularly flexible to position the camera.
Overall, I can really use the suction cup holder in my studio.
It sticks best on smooth and clean surfaces. It holds securely even when I attach heavier cameras to the mount.
The two ball heads make it particularly flexible to position the camera.
Overall, I can really use the suction cup holder in my studio.
22/01/2026
This suction cup holder is just perfect. Made of metal, it offers a quality feeling from the moment you take it in hand. The grip is very powerful, guaranteeing a stable fixation both on glass and on a flat surface.
Very simple to use, it is easy to install and remove. The little extra: the clearly visible safety alert line that tells you if the suction cup is securely attached. A reassuring and well thought-out feature.
A reliable, elegant and effective support — we can only highly recommend it.
Very simple to use, it is easy to install and remove. The little extra: the clearly visible safety alert line that tells you if the suction cup is securely attached. A reassuring and well thought-out feature.
A reliable, elegant and effective support — we can only highly recommend it.
19/01/2026
The K&F Concept 4.5″ suction cup mount combines strong grip with maximum flexibility: With a load capacity of up to 60 kg horizontally (40 kg vertical), it can be securely attached to any smooth, non-porous surface such as car paint, glass or window panes. The included air pump creates a reliable vacuum that can be released just as quickly with a quick release.
Thanks to the 360° ball head, you can easily point your camera or mobile phone at the perfect angle. An action cam adapter and smartphone clip fit GoPro Hero 8 to 13, Insta360 X4, DJI Osmo Action 3-5 Pro and many more models. Two standard 1/4” threads and 3/8” ARRI positioning holes provide additional mounting options for microphones, LED lights, or monitors without the mount bending.
Whether in the car, at the window or on smooth metal surfaces, this suction cup mount is the ideal solution for smooth POV shots and creative perspectives when filming and taking pictures.
Thanks to the 360° ball head, you can easily point your camera or mobile phone at the perfect angle. An action cam adapter and smartphone clip fit GoPro Hero 8 to 13, Insta360 X4, DJI Osmo Action 3-5 Pro and many more models. Two standard 1/4” threads and 3/8” ARRI positioning holes provide additional mounting options for microphones, LED lights, or monitors without the mount bending.
Whether in the car, at the window or on smooth metal surfaces, this suction cup mount is the ideal solution for smooth POV shots and creative perspectives when filming and taking pictures.
18/01/2026
I have already tested some of them, and now I admit that it is the best I have had in my hands.
It is a real investment that would be perfect if it were delivered, at this price, with a small square case in which you could put the pre-cut foams delivered, which ensure their protection and longevity.
It is a real investment that would be perfect if it were delivered, at this price, with a small square case in which you could put the pre-cut foams delivered, which ensure their protection and longevity.
16/01/2026
In the world of camera rigging, there’s an ever-present tension between convenience and security. Anyone who’s ever watched a mirrorless camera bounce off a bonnet at 70mph knows which one matters most. Enter this unapologetically robust mounting solution — a device that doesn’t whisper “I’ve got this” but rather slams its pint on the table and declares, “Nothing’s going anywhere.”
This mount is, to put it plainly, an absolute unit. Once fastened down and properly engaged, it holds with the tenacity of a terrier on a trouser leg. The quoted horizontal force rating is 60kg, which might sound absurdly high unless you’ve had the pleasure of trying to film anything at speed — say, from the flank of a fast-moving car, motorbike, or any other mode of transport that laughs in the face of gentle breeze. At high velocities, air resistance doesn’t nudge; it yanks, tugs and attempts outright theft. So while the numbers might seem extravagant on paper, they’re entirely justified in practice.
That said, with great strength comes great aerodynamics — or rather, the need to respect them. While this mount could theoretically hold something chunkier, practicality (and physics) say otherwise. Stick anything too big on the side of a moving vehicle, and you’ll quickly be testing more than the mount’s tolerance — you’ll be auditioning for a slow-motion catastrophe reel. Personally, I’d limit my ambitions to action cams such as a GoPro. Lightweight, streamlined, and less likely to transform into an airborne projectile.
Where this mount truly earns its keep is in the build quality and thoughtful design. The included magic arm is no afterthought — it locks into position with satisfying firmness, allowing precise placement without the fiddly, wobbly nonsense that plagues lesser models. It also features ARRI-style anti-rotation pins, which might not excite the average hobbyist but will bring a knowing nod of approval from professionals tired of mounts that slowly unfurl themselves mid-shoot like a sleepy sunflower.
Installation is refreshingly straightforward — though not idiot-proof, mind you. You’ll need a clean, flat, smooth surface for the suction to do its job properly. Press the base down firmly, begin pumping the plunger like you’re trying to resurrect a tiny bicycle tyre, and watch as the white line disappears. That’s your visual cue: you're now locked in and good to go. From there, it’s simply a matter of positioning your camera using the magic arm and tightening everything into place.
This isn't a flashy piece of kit designed to dazzle on unboxing videos. It’s not covered in RGB lighting or emblazoned with slogans about “pro-level performance.” What it is, is industrially competent, technically reassuring, and designed for people who care more about function than fluff.
In short, this mount means business. It’s not here to make friends; it’s here to hang on for dear life. And in the end, that’s exactly what you want when your kit is dangling off the side of a speeding car.
This mount is, to put it plainly, an absolute unit. Once fastened down and properly engaged, it holds with the tenacity of a terrier on a trouser leg. The quoted horizontal force rating is 60kg, which might sound absurdly high unless you’ve had the pleasure of trying to film anything at speed — say, from the flank of a fast-moving car, motorbike, or any other mode of transport that laughs in the face of gentle breeze. At high velocities, air resistance doesn’t nudge; it yanks, tugs and attempts outright theft. So while the numbers might seem extravagant on paper, they’re entirely justified in practice.
That said, with great strength comes great aerodynamics — or rather, the need to respect them. While this mount could theoretically hold something chunkier, practicality (and physics) say otherwise. Stick anything too big on the side of a moving vehicle, and you’ll quickly be testing more than the mount’s tolerance — you’ll be auditioning for a slow-motion catastrophe reel. Personally, I’d limit my ambitions to action cams such as a GoPro. Lightweight, streamlined, and less likely to transform into an airborne projectile.
Where this mount truly earns its keep is in the build quality and thoughtful design. The included magic arm is no afterthought — it locks into position with satisfying firmness, allowing precise placement without the fiddly, wobbly nonsense that plagues lesser models. It also features ARRI-style anti-rotation pins, which might not excite the average hobbyist but will bring a knowing nod of approval from professionals tired of mounts that slowly unfurl themselves mid-shoot like a sleepy sunflower.
Installation is refreshingly straightforward — though not idiot-proof, mind you. You’ll need a clean, flat, smooth surface for the suction to do its job properly. Press the base down firmly, begin pumping the plunger like you’re trying to resurrect a tiny bicycle tyre, and watch as the white line disappears. That’s your visual cue: you're now locked in and good to go. From there, it’s simply a matter of positioning your camera using the magic arm and tightening everything into place.
This isn't a flashy piece of kit designed to dazzle on unboxing videos. It’s not covered in RGB lighting or emblazoned with slogans about “pro-level performance.” What it is, is industrially competent, technically reassuring, and designed for people who care more about function than fluff.
In short, this mount means business. It’s not here to make friends; it’s here to hang on for dear life. And in the end, that’s exactly what you want when your kit is dangling off the side of a speeding car.
13/01/2026