I’ve owned a few K&F Concept products before, so I was already familiar with the brand and had high expectations. This mount definitely delivered. The build quality is extremely high and the suction is rock solid.
I’ve used it with both my Sony FX3 and Sony A7R5, and it holds them with no issues at all. I mounted it on my car window to get a variety of shots, and also mounted it on my trunk window with the trunk lifted to capture a top-down view. It worked beautifully in both cases.
The suction setup is super easy to use. The locking tab gives you a strong sense of security, and removing it is just as simple when you’re done. At no point did I feel like the camera would fall or come loose.
This mount is absolutely amazing. If you’re shooting video or photos and need a reliable car mount for heavier gear, I highly recommend this.
I’ve used it with both my Sony FX3 and Sony A7R5, and it holds them with no issues at all. I mounted it on my car window to get a variety of shots, and also mounted it on my trunk window with the trunk lifted to capture a top-down view. It worked beautifully in both cases.
The suction setup is super easy to use. The locking tab gives you a strong sense of security, and removing it is just as simple when you’re done. At no point did I feel like the camera would fall or come loose.
This mount is absolutely amazing. If you’re shooting video or photos and need a reliable car mount for heavier gear, I highly recommend this.
12/03/2026
I could not be happier with this. Well actually maybe. It's so solid on a flat smooth surface, it's almost too hard to get off as the buttons on the side don't quickly release it. But 5 stars for this thing and it's so easily adjusted by the single wing nut on the arm. What a great design! I used it so far with my ZV-E10 II and will do so with my A7C2 next. Great buy and great part of any camera gear collection.
11/03/2026
I am a vlogging artist that travels around Montana, I used this suction cup mount on my most recent trip hanging my Sony AX53 Camcorder upside down from it while it stuck to the passenger window of my car and my front windshield. I found this mount very well built, suction seems reasonable and held for over an hour with no signs of loosening. I appreciate the safety line that lets you know if it is losing its suction, and also the additional mounts with different screw sizes to fit multiple additional options for lights and gear. I frankly love it. Great value for the money and works perfectly for my needs while holding a heavier camera.
09/03/2026
I have used this camera mount for a couple of separate video productions in the last couple of weeks, and it has been the perfect tool I didn't know I was missing. This was used for holding a GoPro to the interior windshield of a car for some driving shots. It was attached just below the rearview mirror and had a great grip! The pump on the side made sure to remove as much air as possible, and at no time did the mount feel like it was going to release. Speaking of releasing - there is a little numb on the side of the suction cup for taking it off - it takes a little force with your thumb to get it to move, but once it does, the mount releases cleanly. The other time I used this was for holding a wireless video receiver to the side of a trailer - we needed to get it off the ground and didn't have a stand taller than the trailer, so we decided to use that. Same as with the camera, it suctioned on easily and held strong for the 2 hours we were using it.
07/03/2026
I've always been skeptical about suction cups, but this one made by K&F is over-engineered (or is it just right?) and earns my mark of approval and trust. I really like this suction cup, even though it's a little difficult for me to apply the release tabs to get it off whatever I stuck it to. I would rather have it be harder to remove than easier, so it's still a win in my book. The included magic arm and dual-ball head functions great, though I do wish the lever were spring-loaded so that you can pull it and rotate it independently for better leverage. Minor gripes from me. It solves my biggest issue: security and safety.
04/03/2026
I've tried two other suction cup mounts, this one is the definite winner. The major parts are almost all made from aluminum. The base for the large 4.5 inch suction cup has a myriad of 1/4 and 3/8 inch screw and locating holes. The magic arm is also aluminum with 1/4 screw threads on each end.
The suction cup and base uses a pump system which actually removes air from inside the suction cup. The more common suction cup system uses a lever or similar design to increase the volume of the suction cup creating the difference of air pressure between the inside and outside. The advantage of the pump system is the plunger also serves as a pressure gauge and can warn you when the pressure reaches unsafe levels. The instructions advise to check the mounting every 2 to 4 hours depending on usage.
The K&F Concept mount is the most firmly attaching of the mounts I've tested. One is useless and is destined for the rubbish bin or as a desktop (non-suction) mount.
The suction cup and base uses a pump system which actually removes air from inside the suction cup. The more common suction cup system uses a lever or similar design to increase the volume of the suction cup creating the difference of air pressure between the inside and outside. The advantage of the pump system is the plunger also serves as a pressure gauge and can warn you when the pressure reaches unsafe levels. The instructions advise to check the mounting every 2 to 4 hours depending on usage.
The K&F Concept mount is the most firmly attaching of the mounts I've tested. One is useless and is destined for the rubbish bin or as a desktop (non-suction) mount.
03/03/2026
When I first opened the box the first thing I noticed is how nice the machining is on this kit. As nice as any accessory I have acquired... ever. As to function, the suction cup holds well to several glass surfaces I tested it on. The key to a good attachment is to ensure that the surface of whatever you are attaching to is clean and smooth. So a quick cleaning of the surface you intend to attach to is recommended. Good sized thumbscrew allows you to tighten the magic arm easily and holds tight under load. K&F produces some of the best value in filters and they are doing a stellar job with all of their accessories. Overall this is a nice bit of kit and certainly worth your consideration.
01/03/2026
This rig is seriously beefy! It's pro grade construction is really fantastic and is absolutely worth the price tag. I use an action cam at work quite a bit, and would often magnet mount it to my work truck body for filming blasts in the field. My new truck is all aluminum and I couldn't use my magnetic mount anymore. This suction cup mount is insanely strong and I can mount my Osmo to any of the windows on my truck!
It can hold a standard 1/4" mounted device and also includes a spring loaded clamp that allows you to hold a phone with it. The balls have rubber o-rings built in to them which seems to give a bit of shock resistance and seems to hold better than metal on metal ball and sockets.
This is really well designed, easy to use, really well manufactured and I would recommend it in a second. It's very impressive and the price is on point.
It can hold a standard 1/4" mounted device and also includes a spring loaded clamp that allows you to hold a phone with it. The balls have rubber o-rings built in to them which seems to give a bit of shock resistance and seems to hold better than metal on metal ball and sockets.
This is really well designed, easy to use, really well manufactured and I would recommend it in a second. It's very impressive and the price is on point.
25/02/2026