The picture shows a plumbing issue not visible without the scope. We also have video of active leak.

If you're looking for a good all round inspection camera this is it....
I purchased this with specific task in mind:
1. Plumbing inspection and leak detection especially when the drain is clogged...
2. Automotive and light duty Truck repair - used it to do visual inspection inside cylinders on diesel engine valve, cylinder walls and piston.. I used it to locate hidden bolts while changing out cam driven distributor on 1994 Toyota Camry..
3. Home HVAC inspection on evaporator, condenser, and supply side air registers.

I am retired and no I am not a professional.. just like fixing things and the K&F Concept Inspection Camera is soooo much better than using an inspection mirror and a flash light....plus you don't have to climb over or under things to do inspections....My wife uses it to find things that she has dropped behind the washing machine, dryer or the stove...

Great item must buy works great for getting good views, high quality imaging make sure you put protective cover over camera lines. I did it and accidentally broke mines hoping company might be able to send a replacement.

I have a 2003 Camry 2.4L engine with a P0420 OBD-II Trouble Code. I was told to buy new catalytic converters. With a price tag of $2,500 for new converters, it made sense to do my own inspection and work-around. There are many catalytic cleaners on the market, but how do I know if the treatment I used worked? I needed to get some pictures inside the Catalytic converters, and they had to be bright and clear. After studying every review of the K&F Concept , it looked like the best bang for the buck. As I treated my catalytic converters, the pictures revealed my success along the way. I saved a ton of money with the . It took about 15 minutes to figure out the buttons and what they do. It's all in the settings and MODE switch. The OK button takes you through where you need to go in each MODE search. It's as simple as that. I love the fact that the screen tilts on the handle. The tilt comes in very handy. As for the quality of the machine itself, there is nothing negative to say. The screen is large and the images are crisp and sharp. I love the camera cable. It is heavy duty and strong. It feels very professional while using it. The camera itself is tiny enough, about the size of a pencil. In fact, I just ordered the 3.3 foot
Borescope-Inspection Camera Accessory that goes with the . It's Waterproof. It comes with a Hook & Magnet Mirror. The 3.3 foot camera cable completes the for me. I found caps to cover the two ends on the 16 foot cable and will hang it in my garage. I plan to use the 16 foot cable for my home inspections. Then I will put the 3.3 foot cable in the beautiful case the comes in. I will use the 3.3 foot cable more often for auto repairs, etc. I would recommend the K&F Concept without any reservations. I was not paid for this review. Nor was I asked to make one. It all comes from the love I have for this device. This camera is a great tool to have when you need it. It can save me a lot of money when inspecting things around the house. Being able to look inside of things without taking them apart is a dream come true for me.

I love the articulation and now the customer service. Ive used this for a while now and the head now struggles to move at all, I contacted DXZtoz and they are sending me a new handle/camera!

I am an HVAC tech I use this camera during my furnace safety inspections , literally pays for itself when you find a cracked heat exchanger. I would say this is an essential tool if u work on furnaces. Very clear picture quality & quality built battery life is solid. really only con is that the camera is too long for how I use it but that could be a pro for someone else. If you do furnace heat exchanger inspections this is a must buy !

The shipping and packaging from Kentfaith is as always top.

The endoscope camera from the company K&F Concept comes just in time. I had to run a LAN cable through the tube from my 1 floor to the ground floor and couldn't get through. This is very annoying because I have no other way from top to bottom. Through this camera I found the error and eliminated it. The picture quality and the light to it were just awesome and everything is just right. The processing and the quality of the device is P/L technically top. When using it, I noticed something that you have to watch out for the device. I will get me a holder to it or manufacturer could install a magnet, if the built-in technology allows. The connection of the camera is connected to the housing with a locking system > TOP. The hose is also accordingly very rigid, so that it can also cross any obstacle without problems. The charging cable is included in the delivery. For this, the power supply is not on board. Nevertheless, I can recommend the endoscope camera with 2 lenses

This product is amazing and helped me as an inspector and my company so many times. It helps us create a visual for our client and also helps us see the unseeable. It does take some time getting used to controlling the feed but once you get the hang of it, then its not so bad. I highly recommend it.

I use this inspection camera for working on HVAC equipment. It works great for looking at heat exchangers, burner assemblies, ducting and more. It makes the inspections easier and without having to disassemble the system as much.

I usually don't write reviews but this is really great product. The camera is extremely clear and the entire unit is very easy to use. I purchased this as a replacement to another camera and this one is 1000 times better. We used it to wire new lights in the ceiling (picture attached). Had to drill holes and fish wires through small holes and through joists. The magnet and hook attachments were invaluable. Highly recommend this product !!!