This silicone sleeve case is a great accessory for the Insta360 Go Ultra. The material is soft but durable, and it fits the camera snugly without adding unnecessary bulk. The built-in lens cover is a nice touch and gives extra peace of mind when the camera is not in use.The side opening for the memory card is very convenient and means you do not have to remove the case for quick access. Overall, it provides solid all-around protection while still being easy to use. Highly recommended for anyone looking to protect their action camera.

Perfect fit. The downside to this kind of case, but will be an issue with any of them, is that it will not fit into the housing with it on. But, when it's out of the housing, this is great to have on it. It looks and feels of good quality. The precision cutouts on the back allow it to still be easily attached to the magnetic clip accessories. Out of the three protective covers I have for this camera, this is easily my favorite. I especially love how the case fits just behind the removable external lens, so I can still swap it out for other lens filters I have, something I can't do with my other cases.

Super compact and grippy. The Silicon case adds a thin layer of protection to that ultra compact camera, which is really necessary when you are handling the camera without the bigger case, because it is a litte too small and slippery. The case comes with a nice lens cover that is also sorely needed. However, the case is missing a strap to keep the cover from getting lost. Finally, the little piece of cover between the USB port and battery compartment is a bit too thin. It stretched a lot and seemed like it was close to break point when I was trying to fit the camera into the case. While Silicon can stretch a lot, but this is likely a weak point that will tear up eventually if you are constantly swapping out between the silicon case and other cases that would allow for, for example, selfie sticks with 1/8" attachments, or when you place it in the battery/screen/other accessories. Still, good additional layer of protection and grip for very little money. Value, but with a bit of compormise.

So far this sleeve has worked ok. It fits very well and easily goes on and stays on well. It protects acceptable well and prevents scratches and adds a decent amount of protection if dropped. Altogether this works well.

This is a good case for the Insta 360 go ultra. The best part is the silicone lens protector that covers the lens. I would add a small strap or tether onto the lens cover to the actual case itself, just so you don’t loose the lens cover.This is something that should have been included with the case, but not a big deal as that is a small detail that can be added to fit your need.Overall K&F makes pretty good quality aftermarket items for your camera, this case included. Easy to put on your camera, just don’t expect to drop your camera off a building. This is to protect the camera in normal use situations.

do you have your insta360 go ultra yet? yeah, me neither. it's on the way. or maybe you're one of those extra lucky pre-order people who already has one. consider yourselves lucky ducks.either way, while waiting, just as i imagine one would while expecting a child, getting all the things for the pending arrival is of course wise, and otherwise just fun. K&F is a solid photo/videography company and makes great accessories. this little silicone case i imagine will work as well as the best of them. no straps, in case you're curious. just silicone. in a tiny package. because the best things come in tiny packages! 5 stars.

This is a nice simple silicone sleeve Case for the insta360 go ultra camera module. The silicone rubber feels good and the fit is great. It has all the cutouts and doesn't seem to interfere with the camera's functions. The cover for the lens can be removed by itself without having to remove the entire case. There is one big negative about this case and it is that the camera module will no longer fit into the pod. If you only intend to use the camera module without the pod, this will be the perfect case.

This is a good case for your Insta360 ultra, all cut outs worked fine and are very precise, the only thing I dont like is that you can not use it when attached to the pod. The lens cover fits well but sometimes it is hard to put it on. It is a good case to protect your camera but it will not work with the pod.

The insta360 Go Ultra is intvended to spend much of its time living outside its protective pod.This wraparound silicone case from K & F Concept will help protect it from the jolts it might incur.It's well-molded with openings matching those on the standalone Ultra camera.The back is open and there are openings for the quick release bracket tabs. I tested it with the Magnetic Pendant as well. There was a strong grip with the bertical side of the pendant, but it was weaker on the beveled side. In fact, it was sliding off the beveled side. I couldn't test it with adhesive tans, but it looks like it work.The case slips on easily, but be sure to wipe the lens down with a microfibre cloth after mounting. It's difficult to mount the case without touching the lens/The included lens cap is a nice addition, though it's fairly easy to accidentally knock it off the lens. I would suggest tethering it to the lanyard hole on the case.That lanyard hole is, in my opinion, a worthwhile feature. The Ultra standalone is small and innocuous, a great combination for street photography. The case makes the standalone camera much easier to handle. Experienced photographers will know how to shoot without a viewfinder. The wide field of view of the Ultra makes this easy.The Ultra standalone with the case on is not intended to fit in the pod. You have to take the case off to get the camera in the pod, something that takes only a few seconds.If you really want to take advantage of the Go Ultra's standalone camera. this is a great addition to your kit.Jerry

Perhaps symptomatic of the extreme conditions these Go Ultra's are put through, there is a plethora of aftermarket items catering to accessorizing the cameras in every way possible. Notably, this rubberized housing from K&F Concepts seems to be engineered pretty well and has held up admirably in the few days that we've had this in use. It seems to be made from a high tensile silicone, ensuring the durability of the cover and looks lustrous in appearance which might make it less prone to attracting and collecting dust particles. Putting on and taking off the body cover is easy and the flexible nature of the silicone does a good job of warding off fingerprints. The lens cap especially has been a welcome addition. The cut outs are accurately placed for allowing full usage of the mic and indicator light, in addition to providing access to the microSD card slot. The housing also will allow use of attachment of the Insta magnetic mount without needing to remove the case, a clear bonus.If there is any drawbacks, it is that we wished it included a small tether so that it would not be as easy to lose the cap, but that's a small matter in the overall scope of the product. We ended up securing the lens cap under a piece of gaffer tape mounted to the underside of the magnetic quick release.