not bad it fits the nano also but kinda wiggly

Another quality bit of kit from K&F concept, it compliments my DJi osmo nano perfectly and makes interchanging the camera a breeze, very quick and easy to use, this is another nice product from K & F.Overall it fits the osmo nano perfectly and the magnet makes interchanging the camera very easy!

K&F CONCEPT Magnetic Quick Release Adapter Mount for DJI Osmo Nano/Action 6:I'm noticing that this brand makes many useful accessories for camera's and drones whilst sticking to a nice black and orange theme.This mount is a new addition to my collection that will work well with both my DJI Nano and Action 6 cameras.The version that I picked up is the Magnetic Mount with 1/4" and Folding Adapter one. It provides 2 ways to have your filming device mounted to various types of clamps, brackets or sticks. It works similar to what you might get with your DJI Nano camera if you bought the more expensive 'adventure pack'; so this will benefit you more if you didn't get that pack. OR it basically replaces the ones you get with any pack for the DJI Action 6. It should work with a DJI Osmo 360 as well but I haven't tried that as yet.What is good about it is that you don't necessarily have to disconnect the camera from it and can just take them both across to the new mounting position. Overall this just expands your options with how you can mount the cameras.I think it is well made and reasonably priced because it will work across a range of products.

The mount only fits the newer cameras, OSMO Action 6 and OSMO Nano.

In contrast to the original holder, it is made entirely of aluminum - which is also necessary with the foldable straps to make it last. When they are not needed, the tabs are fixed by magnets.

A 1/4 thread makes the holder more versatile than the original. In general, it also looks good with the orange anodized clips. A GP slider is included in the package, but it doesn't look particularly valuable to me.

In terms of price, it is close to the original bracket, but is more valuable and versatile.

I have already used various magnetic holders for my DJI Osmo Action devices (3 and 5 Pro), but they were not 100% stuck. It finally fits perfectly, vibration-free and like a glove. The magnetic force is good and the fixation does not allow wobbling. It was precisely at this point that I always had the shortcoming of my previous mounts that they were not properly stuck. This means that there was always, even if only minimally, a bit of game when it came to the connection.

The workmanship of this mount is good and the contact surface is designed with a silicone pad, which provides additional stability. It is easy to attach and release. The additional 2 brackets are foldable and hold magnetically at the bottom when you only use the ¼ connection. The price/performance ratio is in line with the good quality and I am more than satisfied with it. Clear recommendation on my part ;-)

Found this to be a very odd magnetic mount. Every mount i have that uses magnets has been for the whole range of DJI Action cameras and i've never had any issues using them with my DJI Action 4 camera. But this mount, the magnet repels the camera so every time i try to get near to clip it on, the magnet pushes it away, regardless of which way round i have the mount.I can overpower the repelling magnet and clip it on and it stays in place but the magnet is very odd. Perhaps the Action 6 uses a specific magnet so no earlier magnetic mounts work well with it but i've never heard of that.Putting that aside, the clamp is a well designed folding style, that once tightened up, behaves just like a solid one.The metal retaining clips are very fiddly to get to the one with the thumbscrew on that side, there's not enough room to get a finger in there to unclip it if the thumbscrew handle lugs are orientated in a certain position. Minor negative but it is a fiddly annoyance.With the camera attached the rubber pad on the mount, stops any wobble or vibration.Overall i found it a really good mount and good quality, but the magnet issue was something that seemed odd for my Action 4, but as it's specified Action 6 i can't confirm if that issue still happens .

A magnetic quick-release system that fits the DJI Osmo Action 6 particularly well and snaps into place cleanly and reliably. DJI has finally understood that a fully symmetrical quick-release fastener should also be mountable in both directions and has aligned the magnets accordingly. That's exactly how it has to be — and it works great with this adapter.

The disadvantage of this sensible design change, however, is that the system is no longer compatible with older DJI cameras, such as the DJI 360° camera. However, this is not an omission by K&F Concept, but a consequence of the change made by DJI. To be honest, I never realized why this wasn't solved this way earlier.

The adapter itself snaps into place very precisely, can be easily attached in both directions and, thanks to the magnetic guide, finds the correct position virtually by itself. I particularly like the red anodized spring clips on the sides — they are clearly visible and are therefore much safer to operate.

On the underside, there are the fold-out fork mounts typical of action cameras, as you know them from GoPro. When not needed, keep them magnetically clean in place. In addition, the adapter has a robust, integrated 1/4-inch thread, which significantly expands the range of applications.

Overall, the adapter makes a very high-quality and extremely stable impression. It is made entirely of solid aluminum, is neatly finished and significantly more robust than the plastic adapter included with the camera system.

If you own a DJI Osmo Action 6 and are looking for a reliable, sturdy quick release, you can access it here without restrictions.
I deserve five stars for this.

This fits the Nano and Action 6 cameras perfectly. With foldable legs, it works with action cam fittings and standard 1/4" tripod mounts, so it eliminates the need to carry mounts for each purpose. Good quality, so offers good value for money

A magnetic adapter that has a 1/4 thread on the base once the “legs” are folded, very practical for using your camera on a tripod or magic arm.

It is fully compatible with DJI cameras, the tolerances are good although I would have liked it to be a little firmer, the quality of the materials is very good, the screw is also of good quality, the interlocking base is basic (the base that is fixed to the base that is attached to the base that is on the camera) but the rest is qualitative.

This quick release adapter is a great addition to my kit. The magnetic quick release system works flawlessly, making it incredibly easy to switch between setups without wasting time. The foldable adapter with the 1/4"-20 thread is clever, allowing me to attach it to tripods or extension arms with no hassle.The build quality is also excellent, made from sturdy aluminium alloy with a smooth finish that feels premium and durable. I also appreciate the silicone pads that protect the camera from scratches during assembly. It locks securely even during active use, which gives me confidence when filming sports or vlogging on the goFor the price of £19.99 at the time of review, this is a great purchase offering excellent value. K&F Concept continues to deliver high-quality products at reasonable and accessible prices, and this mount is no exception.