The basic idea behind this vacuum-based suction cup holder is as clever as it is convincing: If you place the suction cup on a smooth surface, the switch in the middle is automatically pushed in. This activates the integrated pump, which creates a reliable vacuum — without the hassle of manual pumping. And as a clever addition, there is a safety mechanism: If the vacuum drops, the pump automatically restarts — the holder therefore remains permanently stable as long as the battery (rechargeable via USB-C) supplies energy.

Mechanics and workmanship — thoroughly thought-out The workmanship and mechanics of the bracket are

also convincing across the board. The joints consist of hinges that are pleasantly difficult but run cleanly. These easily hold the dead weight of a pocket camera and can still be moved comfortably and in a controlled manner.

The connection between the camera mount and the articulated arm is designed to rotate and locks reliably at various angles. This results in additional interesting settings that allow you to adapt the mount even better to individual requirements.

The mount itself is made of high-quality metal with cleanly deburred edges and soft silicone pads, which reliably protect the camera from scratches. The additional mounting options — a 1/4 inch thread on the bottom and a cold shoe on the side — are also practical additions that further expand the range of applications.

A particular highlight is the magnetic ring, which serves as a connection between the holder and the suction cup base. The ring adheres magnetically to the base and at the same time has magnets of its own, which make it possible to turn it around. This not only allows you to securely attach the bracket to the base, but you can also attach it to surfaces containing steel or iron — a sophisticated and extremely practical solution.

All magnetic holders in this system are also MagSafe compatible. This means that not only can the holder for the Osmo Pocket be securely attached to the suction cup base, but also, for example, an iPhone or another telephone with a corresponding case that has integrated magnets. This significantly increases the flexibility and versatility of the system.

The magnetic force is strong: Even on my wall painted with magnetic paint — which normally does not carry heavy weights — the bracket held securely and stably.

Endless mounting options

The combination of the vacuum-based suction cup base, the reversible magnetic ring and MagSafe compatibility opens up countless applications:

On smooth surfaces such as glass, painted surfaces or plastic On surfaces containing steel and iron thanks
to the strong magnetic adapter
Also as a table stand for horizontal applications The versatility and stability of this mount make it a clever and reliable companion.


Conclusion: An almost perfect product

This system is excellently manufactured, cleverly thought-out and incredibly flexible to use. The combination of suction cup, magnetic ring and MagSafe compatibility works absolutely reliably and offers an enormous range of applications. For me, one thing is clear: five stars — absolutely recommended!

Build quality feels great! The little cage the it wraps around the camera base fits perfectly and holds the camera snug ensuring a reliable hold to my pocket 3. The vacuum holds very tight and creates a suction very quickly. I haven’t had any issues with the vacuum losing its suction during extended use. The MagSafe style magnetic ring holds very tight as well. I love that it charges with USB-C as it’s super easy to find a charger for when out.

This device is wonderful because it has an electric suction cup to adhere strongly, you just have to press on the surface where you want to adhere it and that's it. To take off this one, simply press the button on the side. This device charges quickly via the USB C port and its lifespan is long so you don't have to worry about going home a while recharging it. It comes in a pack with a support for Osmo pocket 3, it fits perfectly and performs its function without hesitation. In addition, the materials are of quality, no cheap plastics, so I assure you of their useful life.

K&F Concept suction cup kit designed specifically for the DJI Osmo Pocket 3, offering a 2-in-1 magnetic and electric vacuum system. This allows the camera to be attached to both metallic and non-magnetic surfaces, making it very versatile for shooting. The attachment is solid and secure, ideal for moving planes (car, motorcycle, window, etc.). The installation is quick and easy, and the support remains stable even during vibrations.

The search for tools that amplify the creative possibilities of our equipment is, after all, a constant. A bit like that search for the remote control that magically moves around the couch, only in this case, instead of finding a mismatched sock, you hope to find something that will make you take dizzying shots. And on this horizon, I received a small package that, if you saw it like this, you would not have given him the advance for a coffee. Inside was this magnetic holder, the frame and an electric suction cup for the DJI Osmo Pocket 3. And what can I say, sometimes the things that arrive without you looking for them, turn out to be the most interesting. It's not that it promises to make you reach the stars or to let you sail the oceans, but it does give you a glimpse of new paths, and it's already a good step. Now, since I received a kit that looks like the separate brother of a suction cup and a magnet, it seems right to analyze the two elements separately before seeing them at work together. So, I'm going to divide the matter into three parts. The first is for the frame, the second for that strange suction cup that makes a vacuum on its own and the third part is the moment of the big meeting, when they hug each other and we see what happens. Part One: The Frame with Magnetic Support What is immediately striking, when you take it in your hand, is the feeling of weight, of substance. It's not one of those lightweight pieces of plastic that when you touch them you wonder if they'll break before you even use them. This is metal, nice and solid. They did it with the idea that it should not move, in short. They have added a magnet that is so powerful that if you place it on the kitchen hood, you can hang on it too, if you are thin. Of course, it's not ideal for curved surfaces. It's not like you put it on the sign post to shoot from above, because the surface is round and that thing doesn't stick there. And not even on the bike frame, unless you want to leave a small indelible memory on the paint. However, on flat metal surfaces, the grip is absolutely secure. I tried it on the car body, how do you do it with these things, and I must say that the seal is there. The important thing is not to make a curve at 180 per hour and, above all, to be careful when you peel it off, because the magnet has no rubber coating and if you don't handle it carefully, it leaves a mark on the paint that, I'm not saying is a tattoo, but almost. A characteristic that makes you say “ah, how smart!” is MagSafe compatibility. Practically this thing can talk to your iPhone or to the case that supports this technology. And here a world of possibilities opens up that I had not considered. It's not just a camera attachment, it's a real life companion. The Osmo Pocket 3 attaches to the smartphone and you can take vertical shots, using two points of view, or you use the cell phone display to control the gimbal through the application. Or again, the simplest thing in the world, you attach it to a MagSafe dashboard mount and use it as a camera in the car, without flapping. The design, even without too many embellishments or complicated things, proves to be effective. There is a clip that, once closed, does not open even with cannonades, and some anti-slip rubber pads that do their job. Basically, it wraps around the camera with a crazy seal, as if it were a seat belt. And the nice thing is that you can also mount it on the handle extension or on the additional battery. Then, the sore point, which is not a problem but a break, is access to the memory card. They tried not to block it, but to insert or remove the microSD you have to use a thin tool. Or, more simply, you have to remove and put the support back on. Honestly, I prefer the second option, which at least gives me the illusion of saving time. To do things right, I suggest mounting it with the Pocket 3 housed in its original case, the one they give you when you buy it. However, if you want to use this support every day, the perfect combination is with the K&F Concept protective case, which is always purchased separately. The one there, in my opinion, better protects the gimbal's gimbal and, since it's smaller than the original case, allows you to put everything in your pocket, ready for action. I'm not going to tell you that it's an essential accessory, but if you try it, then you'll hardly go back. Part Two: The Suction Cup Holder This is the device we could call the mysterious suction cup, which for some is fantastic and for others a disaster waiting to ruin the day. But I, who am a man of science, limit myself to looking at it and telling you what I see, without getting caught up in easy enthusiasm or unjustified fears.The first thing you notice is that the materials are of excellent quality, I have to admit it. The body is made of aluminum and ABS, which have been assembled with such care that they look like a single piece, without seams. In the upper part, the one that is visible, there is only a slight bas-relief that indicates the position of the magnet, and nothing else. Essential, almost shy. But the lower part, the one in contact with the world, is much more interesting. The suction cup, the rubber one, has a much smaller diameter than the main body. A rather curious choice, to tell the truth, since the total footprint remains the same. I'm not an engineer, but it makes me think they did this thing for the electric vacuum pump they put inside. Less volume to suck up, less effort for the pump, more speed in the attack and less battery consumption. In short, an idea to improve efficiency. At the center of the suction cup is this small piston and a tiny hole that is used to create a vacuum and then, when you're done, to make it come out and detach everything. And here comes the good thing, the thing you don't expect. This device does not have a pressure switch or a display that tells you how much vacuum there is, it does not have a precise indication. So how does the pump know when it should start working? Simple, he understands it from the mechanical movement of the small piston. To make it easy, if the piston moves, the pump works, if the piston is stationary, the pump stops. Then, when you place the support on a surface, the piston starts to reenter, the pump starts and continues to vacuum until the piston stops moving. But the beauty is yet to come: if the support is firmly fixed on a flat and smooth surface, a small movement of the piston restarts the pump, returning the vacuum to its ideal condition. It's kind of an extra security measure, a bit like a silent guard dog. But if the air manages to seep in too much, then the outlet jumps and your camera... well, your camera is on the ground. So, trust in this thing is a mix between mechanics and good luck. All this suction cup engineering works thanks to a rechargeable battery via USB-C, which today is the most convenient thing in the world, because now every device has this port. And a full charge guarantees you a lot of uses. The indicator, a small LED, flashes red when charging and turns off when fully charged, which is something that leaves you a bit of a mystery about the amount of charge left. In theory, it didn't happen to me, the LED should also indicate the quality of the seal, briefly glowing green with a firm grip. Honestly, I don't know if I didn't see it or if they put it on to avoid being too vain, but I didn't notice this detail. And I can't even tell you if it notifies you when it's about to run out, because despite having used it quite a bit, the battery has never completely run out. It's a bit of a bet on trust, but so far, I've won. Part Three: The Pair Use of the Two Devices And now, the moment of the great encounter, the fusion. Small, but fundamental, detail before any other consideration: the MagSafe ring on the Pocket 3 frame must be attached to the suction cup holder rotated on the back. If you try to place it in the front, as would be natural to do, you immediately notice that due to magnetic repulsion, the same polarity of the magnets, the coupling does not work. It's a bit like when two people who can't stand each other try to shake hands and they can't do it. Not only is the aesthetic effect not great, but the strength of the magnetic grip is drastically reduced. In short, a small mistake that makes you understand that even the simplest things have their rules. Once you get the trick, the combination of the two pieces works like a charm. The magnet of the frame attaches to that of the suction cup with a dry and reassuring “clack”. And once the suction cup is attached, everything stays stable. I have used it in different situations, from the car, where it behaved very well, to a sheet of glass in a window, to a refrigerator door. On every occasion, I placed it carefully, making sure the surface was clean and smooth, and the result was impeccable. For a cost equivalent to one or two dinners with friends, you bring home a set that allows you to shoot from unimaginable angles, without having to buy bulky equipment. Of course, it's not that it lets you shoot from a satellite, but it allows you to explore perspectives that before you could only dream of. And the suction cup, with its air of mystery, gives you a security that, honestly, I didn't expect.In conclusion, this package is a winning combination, despite those little oddities. It won't be the solution for every problem, it won't win you the award for best documentary, but it does give you a lot of arrows to add to your bow. It's a well-made, well-thought-out product, and for what it costs, it offers a lot. I found my limitations in not having a charge indicator on the suction cup and in being forced to remove the frame to change the SD card. But beyond these little things, it works. It works well. And with that, I have finished telling you. I hope you haven't fallen asleep, but if you did, don't worry, it means you haven't been caught up in my story enough. Anyway, thanks for reading. And if it happens to you, go for a walk, which is always good for you. “The evaluation was made as objectively as possible, taking into account the quality of the materials, the care taken in production and the actual use in everyday life, compared to the price of the sales proposal.”

The two parts are not only a really smart solution together, but they are also very “misused” individually. This set is therefore very versatile and suitable for more areas of use than you might first think. The mobile phone holder itself is a small cage, with a really good clip and a pretty red color accent, flawlessly made of metal, protected in important areas with silicone and fits perfectly on the Osmo Pocket 3. The magnetic disc, which is MagSafe compatible and can be turned sideways, is attached to it. For example, you can also mount the mobile phone on the side of the Osmo Pocket 3 as a larger monitor, but only upright. We also find a ColdShoe mount on the left side; the mic or an LED light find their place here. The second part, the vacuum suction cup holder, pleasantly surprised me in its performance and functionality, because at first I didn't really want to trust it. But the technology is solved in a funny way and is even fun. The integrated button activates the pump as soon as it is placed on a smooth surface. And yes, yes, then it will also be tidy, safer than expected and expected. The integrated magnet is MagSafe compatible again, which means that we can not only mount this kit here, but also simply attach the mobile phone somewhere, very practical. The holder is guided via USB-C, i.e., if necessary, on the go via a power bank. Several adhesive magnetic rings are included, as well as a charging cable and a well-made case for the suction cup, which withstands enough pressure so that the pump is not activated in the backpack and drains the battery.

Works perfectly well, with a really good electric suction and magnet strength! Comes with absolutely everything you need to use it in any way you want, too!Only thing is that you might need to remove the security strap from the camera before putting it into the holder, as the holder is very well fitted to the camera, but not if the strap is on. This makes it more stressful to then use the camera again without the holder as you then have to take on and off the strap. It would also be nice if the case was big enough to fit all the parts, but now the holder itself doesn’t go in the case together with the suction cup and charger and smaller accessories.Besides this the holder is very easy to use and when not in use very compact and easy to carry around! It’s also very light weight!

I've been using this mount with my Pocket 3 for the last few days and have fallen in love with itFirstly I'm really impressed with how secure the fit is. It really does hold your camera in place so well that it's going to go nowhere in use.I'm using it for shooting driving shots of me driving but also turning it round and filming through the windscreen for travel shots too and this does it perfectly well.The way it works is like magic - I dont' know what K&F Concept have done but they've created an intelligent suction mount and then a magnetic mount that just works so incredibly wellIt's easy to use, compatible with all the functionality of your Pocket 3, and is versatile enough to have multiple uses no matter what kind of video you're making or location that you're inGreat value for money due to how good it isEasy recommendation - great product!

This mount and suction cup set is faultless. I’ve used it to attach my DJI Osmo Pocket 3 to various flat surfaces, and the electric suction is incredibly strong and reliable, giving me a good amount of confidence when filming. The expansion adapter frame is a brilliant addition, but the real standout feature is the versatile magnetic mount, which also works perfectly as a phone holder. The build quality is top-notch, and it has proven to be an invaluable and well-designed piece of kit. It's lightweight, easy to use and can be fit to any flat surface.

A fantastic piece of kit for any pocket 3 user. The mount is simple to set up and is easy to use. the magnet is also quite effective. I keep it on the metal leg on my office desk. the electric suction cup is very effective and charges very quickly. I have noticed at times that if left over night, the suction cup will have fallen to the floor. however, the suction cup will definitely last a good few hours if needed. My pocket 3 fits easily into the holder and feels very secure throughout using the mount.I can imagine this being great for a vlogger or content creator. When using this mount with the face tracking function on the camera you can definitely shoot some great content!