This small magic arm is made entirely of aluminium/metal and is very well made.
With just one central locking screw, both the middle joint and the two ball joints are fixed. This allows you to adjust every position quickly.
The clamp is covered with plastic pads on the inside to improve the grip on smooth rods.
The diameter of the clamp can be adjusted from approx. 1 - 5 cm.
Cameras, LEDs, microphones, etc. fit the standard 1/4 inch thread (no DSLR would put on it rather Gopros).
The two arms each have a length of 10 cm.
A universal accessory for videographers.
With just one central locking screw, both the middle joint and the two ball joints are fixed. This allows you to adjust every position quickly.
The clamp is covered with plastic pads on the inside to improve the grip on smooth rods.
The diameter of the clamp can be adjusted from approx. 1 - 5 cm.
Cameras, LEDs, microphones, etc. fit the standard 1/4 inch thread (no DSLR would put on it rather Gopros).
The two arms each have a length of 10 cm.
A universal accessory for videographers.
11/03/2026
The Magic Arm from K&F Concept is well made and looks chic. The central swivel has good guidance so that the adjustment is easy. This is particularly important because when the central screw is released, all joints are released. If you still have to make sure that the two halves of the central joint lie exactly on top of each other when aligning the equipment, it gets tricky.
The arm is sturdy enough for lightweight accessories such as smartphones (with an extra holder), small video lights or monitors. I wouldn't attach a full-frame camera because then, at the latest, the clamp will reach its limits.
The arm is sturdy enough for lightweight accessories such as smartphones (with an extra holder), small video lights or monitors. I wouldn't attach a full-frame camera because then, at the latest, the clamp will reach its limits.
06/03/2026
A fairly classic clamp and articulated arm combo (aka Super Clamp + Magic arm) as found in many brands, I tested it with different lighting elements from the smallest LED panel to LED tubes weighing more than 1.5 Kg.
The clamp is a standard model with a 1/4 screw hole and another 3/8 screw hole and unlike the illustrated photos, the 2 are well equipped with holes on the sides for the locking pins that prevent unwanted rotations, which is therefore a good surprise since at the ends of the arm, we have 1/4 screws precisely and not 3/8.
The articulated arm is a little more pushed at the ends than some competing models, which places it at the level of mid-range models, it is tightened by the center segment like the others, but especially has at its 2 ends small heads with 1/4 hand screws + locking pins and small rubber pad for more grip, small keys that make it easier to install accessories and to better secure them.
The manufacturer indicates a maximum load weight of 2 kg and this is consistent with my tests, the presence or absence of holes for the locking pins on your accessory still has an important role on stability.
Conclusion: a fairly classic €36 model that does the job well, with a few extras shared also with other competing models, but which are more around €38 - 40.
The clamp is a standard model with a 1/4 screw hole and another 3/8 screw hole and unlike the illustrated photos, the 2 are well equipped with holes on the sides for the locking pins that prevent unwanted rotations, which is therefore a good surprise since at the ends of the arm, we have 1/4 screws precisely and not 3/8.
The articulated arm is a little more pushed at the ends than some competing models, which places it at the level of mid-range models, it is tightened by the center segment like the others, but especially has at its 2 ends small heads with 1/4 hand screws + locking pins and small rubber pad for more grip, small keys that make it easier to install accessories and to better secure them.
The manufacturer indicates a maximum load weight of 2 kg and this is consistent with my tests, the presence or absence of holes for the locking pins on your accessory still has an important role on stability.
Conclusion: a fairly classic €36 model that does the job well, with a few extras shared also with other competing models, but which are more around €38 - 40.
28/02/2026
We received a box that is quite compact, it doesn't reach even an inch long. The design is very cool: predominant white background, with the details in that orange so typical of K&F Concept. On the front is a photo of the product that gives you a clear idea of what's inside. When you open the box through the side flap (it is sealed), you find a pair of bubble bags that separate the two pieces of the superclamp, so that we don't get anything scratched or knocked.
The first thing that stands out is that it is a product that transmits very good feelings. All absolutely metallic: the sticks, the screw threads, the body of the arm, the handle... you can tell right away that we are dealing with something very sturdy, they have spared nothing. In addition, they have taken good care of the details, everything is perfectly polished, rounded and without any part to scratch. In addition to the matte/satin black finish of the set, we must highlight the pieces that we can squeeze or screw that are in metallic orange. A quick visual aid that contrasts and looks very elegant.
The only thing to keep in mind is that, being all metallic, it also weighs its own. It's not an exaggeration, but you can tell the weight in your hand, and even more so if you add accessories.
As for its operation, it works great, really. The clamp, which is quite generous in size, comes with a rubber part inside so as not to scratch the surfaces against which we squeeze it, in addition to gaining extra grip. It fits with a metallic popcorn on the top, and you don't have to turn it around a lot to make it firm.
The articulated arm is composed of two parts of the same length, which when extended to approximately 25-26 cm. One of the things I liked the most is the ease of use: it has a main popcorn in the center of both parts that, just by squeezing it, automatically fixes both joints at the same time. In addition, that main joint is serrated, which guarantees that once you set the angle, it will not decay for anything in the world.
At each end of the arm there is a standard thread pitch adapter, with a ball-type rotating mount, allowing you to attach a lot of accessories such as flashes, continuous lights, microphones, etc... And to be able to place them exactly at the angle you need. And best of all, both ball joints are also fixed by simply squeezing the central popcorn, it's a rod
The first thing that stands out is that it is a product that transmits very good feelings. All absolutely metallic: the sticks, the screw threads, the body of the arm, the handle... you can tell right away that we are dealing with something very sturdy, they have spared nothing. In addition, they have taken good care of the details, everything is perfectly polished, rounded and without any part to scratch. In addition to the matte/satin black finish of the set, we must highlight the pieces that we can squeeze or screw that are in metallic orange. A quick visual aid that contrasts and looks very elegant.
The only thing to keep in mind is that, being all metallic, it also weighs its own. It's not an exaggeration, but you can tell the weight in your hand, and even more so if you add accessories.
As for its operation, it works great, really. The clamp, which is quite generous in size, comes with a rubber part inside so as not to scratch the surfaces against which we squeeze it, in addition to gaining extra grip. It fits with a metallic popcorn on the top, and you don't have to turn it around a lot to make it firm.
The articulated arm is composed of two parts of the same length, which when extended to approximately 25-26 cm. One of the things I liked the most is the ease of use: it has a main popcorn in the center of both parts that, just by squeezing it, automatically fixes both joints at the same time. In addition, that main joint is serrated, which guarantees that once you set the angle, it will not decay for anything in the world.
At each end of the arm there is a standard thread pitch adapter, with a ball-type rotating mount, allowing you to attach a lot of accessories such as flashes, continuous lights, microphones, etc... And to be able to place them exactly at the angle you need. And best of all, both ball joints are also fixed by simply squeezing the central popcorn, it's a rod
27/02/2026
The arm clamp or rather the overall item is well machined that offers a choice of 1/4" and 3/8" thread options with the jaws having internal rubber pads for protection so shouldn't mark anything its clamped to. The arm has 1/4" standard screws on either ends that swivel as required, with a quoted maximum pay load rating of 2kgs. The arm is quite compact when folded and so means it’s quite a handy size for putting in either a camera bag or a pocket in your jacket. You adjust the arm to the required angle and then twist the central ‘wing’ type screw up and that’s it - once tightened up, it is so strong plus being quite rigid. I am using it presently to hold a field monitor, clamped to a tripod leg, for camcorder use and it does not budge once tightened up. I have a small tripod made by the same maker and that is also of the same high standard in design and engineering.
25/02/2026
This product comes in a cardboard box; once opened, you'll see the clamp and magic arm. As of reviewing this product, it is priced at £32.99 - I definitely believe that this is value.
The product is very high quality, great for so many different situations. I particularly find this useful to attach my video monitor to my tripod while taking videos/photos. The 11in size makes it possible to have the monitor in a very nice position when taking photos.
I also found this product quite useful for attaching my Osmo Action 5 pro to my camera to record myself taking photos - I find this quite a nice creative outlet, and this magic arm makes it so easy. It also has a 1/4 and 3/8 screw holes.
The product is made out of a high quality metal and the grip is great. I'd definitely recommend picking this up.
The product is very high quality, great for so many different situations. I particularly find this useful to attach my video monitor to my tripod while taking videos/photos. The 11in size makes it possible to have the monitor in a very nice position when taking photos.
I also found this product quite useful for attaching my Osmo Action 5 pro to my camera to record myself taking photos - I find this quite a nice creative outlet, and this magic arm makes it so easy. It also has a 1/4 and 3/8 screw holes.
The product is made out of a high quality metal and the grip is great. I'd definitely recommend picking this up.
23/02/2026
The K&F Concept 11” magic arm clamp exceeded my expectations. It effortlessly holds up my Shure SM7b in any position I want it to rest due to its adjustability. The Shure SM7b microphone is also at the top end of the arm’s rated weight, but the arm doesn’t struggle in the slightest.
17/02/2026