• 15.99
Overall Rating 4.9   57
5
Well-built and well-designed, this mount can handle anything from a phone to a (modest-sized) tablet (caps out at 9.7", which unfortunately rules out most iPads). It extends in two ways: the metal rods are spring-loaded and stretch/compress with pretty strong grip; there's also a pair of plastic columns that deploy with a pair of button releases (see picture) that add another few inches of width, if needed. The surface is mostly a nice, smooth, grippy, rubberized coating. There are 1/4" screw mounts on one side and on the back, and a cold-shoe mount on the other side. Very nice quality device from reliable K&F Concept.
compact and very well built compact and very well built compact and very well built
16/11/2025
5
This is a very versatile cell phone and tablet holder for a tripod. Without using the extension, it will hold any typical cell phone . There are two buttons on the side that will open out wide enough to hold up to an an iPad or most tablets. There are 2 1/4" threaded holes, one on the back and the other one on the side with a notch cut out for cables. The other side has a cold shoe you can mount lights or other accessories. This holder seems sturdy and stable and I didn't notice any wobble when using it.
Works as advertised Works as advertised Works as advertised Works as advertised Works as advertised
15/11/2025
5
Pretty cool how it has the 2 springs for a phone but then is expandable yet still uses the springs. The simple things right? And it has a vertical and horizontal tripod mount. It’s great!
It works! It works! It works! It works!
14/11/2025
4
I got this mount specifically for my iPad Mini 6 and it has been great for that so far. Body of the mount is plasticy, but seems sturdy enough for now. I do worry about the longevity of this mount , but so far I have no complaints. Would recommend for anyone looking for a mount big enough for a tablet but small enough to put in pocket
Fits my iPad Mini 6 in portrait & landscape mode
13/11/2025
5
This is a very versatile cell phone and tablet holder for a tripod. In it’s normal configuration It will hold any typical cell phone for mounting on a tripod for videography or photography. But, with the push of one, or two, buttons on the side, it ratchets out wide enough to hold up to an 11 inch tablet when you want to use that instead of, or in addition to, your cell phone.Even when it’s expanded for a tablet, it’s still very sturdy and stable, no wobble. Resizing it is quick and very easy. There are two standard 0.25 inch mounting screw holes on the bottom and the side to facilitate either landscape or portrait orientation.It also has a dry-shoe mount for holding accessories like lights or mics.This is a very rugged little holder. You’ll fell the tightness of the springs and sliders and general construction. The touch of orange on black helps the aesthetics also.Definitely a good buy.
A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder A well built versatile cell phone/tablet holder
12/11/2025
5
It reliably holds my old Sony Xperia Z1 Compact in a retro camera rig.
High clamping force High clamping force
11/11/2025
5
I also like the combination of products.Well made and good quality products!
The quality is very well for this price.
10/11/2025
5
I have tried several tablet holders with tripod screws and this one is undoubtedly one of the best. It is made of thick, good quality plastic and has rubber coating in the areas where the tablet rests. The length of both sides can be adjusted independently using two buttons located on each side of the adapter. In addition, the stops use a tension system with rubber bands to make them stronger and the tablet does not fall. It has a support for attaching a tripod both to the back and to one of the edges, so that it can be used both vertically and horizontally. I recommend it.
Very good quality Very good quality Very good quality Very good quality
09/11/2025
4
At maximum my unit opens to a about 21.3cm. Its smallest size is about 6.1cm.It wouldn't hold an iPhone 5s (5.8cm wide) for example.It did hold my largest tablet, the 12.3" HP Chromebook X2 (21.14 cm). It bows a little bit with larger devices.The unit is mostly plastic except for the orange silicone grippers, and the internal springs/rods. It has a brass insert on the bottom grip, and behind the main body. The top grip has a cold shoe mount.My unit weighed about 65g.The grippers don't handle large cases with flat sides very well. Ideal will probably be thinner devices (<8mm), and devices with rounded edges (like iPhone 6-11).
Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe. Light, plastic phone mount. Expands for big devices. Cold shoe.
08/11/2025
5
This holder securely supports my Galaxy Tab S8 Plus on a tripod with no issues. I really appreciate its compact design, which extends effortlessly at the touch of a button. Even when fully extended, it feels solid and well-built. The rubberized grips do a great job preventing the tablet from slipping, and its lightweight, portable form makes it easy to carry around.
07/11/2025