Great modification to my wide strap on my Nikon 1V2. It gets the metal clips away from my camera.

This is the third one I ordered. The first two would only connect from my home network and would not connect thru AT&T. This one works great, at least so far

I love this mount. It is not compatible with the Nikon FTZ adapter unless you move it from the body to the adapter or buy another mount just for the adapter. I’ve hike a couple mountains and bustled through crowds without fail using this mount.

This connected to my AT&T router and boosted the internet

Part 1 - Minolta MD to Sony NEX adapterTechnically, it slightly overshoots infinity but the issue is easily corrected by dialing back the focus ring just a tad --- Not exact but clearly better than not-at-all.Although very light due to extensive aluminum usage, the build quality and fit-and-finish of the adapter is superb. Connections on the lens and camera mount sides are tight and precise --- absolutely, zero slop. The top of the lens release button is flattened making the lens removal process very easy and comfortable.Other notes:- There are no electrical connections so focus and zoom must be done manually on the lens itself- When mounting the lens, turn the adapter clockwise till you hear a "click"- Tested with a Minolta 85mm f/1.7 Rokkor-X MD lens mounted to a Sony a6000 camera-----------------------Part 2 - Nikon Ai to Sony NEX adapterEdit: Based on my positive experience with the Minolta MD adapter, I also purchased the Nikon Ai adapter later.As with the Minolta MD adapter, the Nikon Ai version focuses beyond infinity a tiny bit. Fortunately, the same solution applies - dial back the focus ring and the horizon will become crystal clear. The build quality is impeccable and the finish is smooth and clean of burrs or machine marks. Connections on both sides are taut and precise with zero play.Additional notes for Nikon Ai adapter:- No electrical connections present so focus and zoom must be done manually on the lens.- Unlike the Minolta MD adapter, mounting the lens for Nikon adapter requires a counter-clockwise turn until you hear the "click" of the locking mechanism- Tested with a Nikon Micro Nikkor 55m f/2.8 Ai-S MF lens mounted to a Sony a6000 camera

EF - Lens adapter perfect for wide angle and other type of lenses cheaper than the viltrox, and better to use since it is from Taiwan and made in japan i rather buy japanese and taiwanese products and support them since their quality is greater than Chinese, i support it since they actually are more detailed on the manufacturer and the way they actually do the diagrams and cuts are precise but i know the quality is even stronger and more durable than chinese cheap brands. Love japanese quality and brands.

Rubber strap which connects harness to the binoculars was too wide to fit in my Nikon Monarch binoculars. Had to cut the rubber to make it narrower. Other than that, it suits me purpose very well. I think it will hold the binoculars securely and it unsnaps from the binoculars fairly easily for storage.

After I purchased a wide angle lens for my Canon M50 I realized that I would need an adapter. Everything came down to making a decision between the budget adapter and forking over more money for the canon brand because reviews were constantly complaining about the budget adapter not fitting and potentially screwing up your camera. Luckily I realized that there were lightly used Canon adapters for more than half off so it was a no brainer and I’m glad to report that it has exceeded my expectations in quality and I’m glad I spent the few extra bucks for the Canon adapter. Definitely would recommend.