67”/1.7m Aluminum Video Camera Tripod Transverse Center Column 22lbs/10kg Load Flexible for Canon Nikon Sony DSLR,T255A4+BH-28L (TM2515T1)
SKU: KF09.085
I purchased the K&F Concept T255A4+BH-28L tripod largely because I needed a more stable tripod that remained highly portable, while offering a good range of functions, especially the ability to do top-down shots. In this price range, this unit fit my needs the best.
The build quality is quite good with a good use of aluminum in all of the locations that are under stress. This was one area that I had a strong focus on as in looking through a large number or tripods in this price range, I would occasionally see units that looked quite good but would have common complaints of certain plastic parts breaking; this unit did not have those issues.
While the tripod has been great to use these past few months, there is one issue that I knew in advance of purchasing (lack of a lever lock for the tripod legs), but accepted since there was no model offered that had the horizontal slider at 67inches or larger with the center column extension while also offering the level lock for the tripod legs. While this is overall a matter of preference, I personally prefer the lever lock because it makes it extremely quick to deploy the tripod to a reasonable height, as well as retract the legs when needed. The twist locks simply take longer to loosen and tighten.
While this is more of a jack of all trades type tripod, it does a good job in all of the areas it covers. While there are options that will do excellently in some of these areas, I am currently unable to find anything else that implements this full range of functions quite as well as this tripod has.
Pros:
Aluminum constructions, and no plastic used in stressed areas, thus offering a better chance at achieving a better longevity.
Horizontal slider and pivot area uses aluminum of a decent thickness, thus it can support a DSLR as well as a heavy macro lens with no problem. Many cheaper ones where the center column has a thin pivot joint are often unable to support a camera and heavier lens if extended more than half way.
While not as good as a fluid head, the horizontal panning function of the ball head mount is fairly smooth, with a very consistent amount of resistance.
Cons:
Depending on preference, twist locks instead of lever locks for the tripod legs.
While the horizontal function is great, there is no way to slide it in and out smoothly, thus you cannot use the horizontal slider function as movement in video use.
Conclusion:
Ideally, I would like to rate it 4.5 to 4.6 stars as an overall score, as while it did very well for my needs, there are areas that could be improved.
The build quality is quite good with a good use of aluminum in all of the locations that are under stress. This was one area that I had a strong focus on as in looking through a large number or tripods in this price range, I would occasionally see units that looked quite good but would have common complaints of certain plastic parts breaking; this unit did not have those issues.
While the tripod has been great to use these past few months, there is one issue that I knew in advance of purchasing (lack of a lever lock for the tripod legs), but accepted since there was no model offered that had the horizontal slider at 67inches or larger with the center column extension while also offering the level lock for the tripod legs. While this is overall a matter of preference, I personally prefer the lever lock because it makes it extremely quick to deploy the tripod to a reasonable height, as well as retract the legs when needed. The twist locks simply take longer to loosen and tighten.
While this is more of a jack of all trades type tripod, it does a good job in all of the areas it covers. While there are options that will do excellently in some of these areas, I am currently unable to find anything else that implements this full range of functions quite as well as this tripod has.
Pros:
Aluminum constructions, and no plastic used in stressed areas, thus offering a better chance at achieving a better longevity.
Horizontal slider and pivot area uses aluminum of a decent thickness, thus it can support a DSLR as well as a heavy macro lens with no problem. Many cheaper ones where the center column has a thin pivot joint are often unable to support a camera and heavier lens if extended more than half way.
While not as good as a fluid head, the horizontal panning function of the ball head mount is fairly smooth, with a very consistent amount of resistance.
Cons:
Depending on preference, twist locks instead of lever locks for the tripod legs.
While the horizontal function is great, there is no way to slide it in and out smoothly, thus you cannot use the horizontal slider function as movement in video use.
Conclusion:
Ideally, I would like to rate it 4.5 to 4.6 stars as an overall score, as while it did very well for my needs, there are areas that could be improved.
20/03/2026
Excelente trípode, lo compré desde Colombia y es excelente! Lo recomiendo
18/03/2026
Is a very stable tripod, with lot of functions and a luxurious look. I hope it lasts forever!
Recommended!
Recommended!
11/03/2026
The K&F Concept 67 inch Camera Tripod is the closest thing your gonna get to a Swiss Army knife at the moment. I have owned the Sunpac, Manfrotto backpack, Bogen and others and the K&F continues to be my favorite all around portable tripod by far.
Tall enough and sturdy when you need a legitimate tripod for serious photography or video but, small enough to pack and versatile enough not to have to bring more than one tripod. Gets into more places than any other tripod Ive used and still small enough to put in a backpack.
The K&F 67inch can be inverted so close to the ground shots are no problem and you can hang a weight or bag from the center post when you need more stability for standard shots. The vertical option is really the game changer here. It allows you to reach over the spread of the tripod to get close on product shots or wedding shots like rings close ups while still allowing you to shoot and unobstructed straight down shot if necessary, very cool!
And after all that, one of the legs can be unscrewed to become a fully functional monopod or even a sound boom pole in a pinch.
The build quality is what you would expect from a quality manufacturer and the included bag is the best I've seen from any manufacturer to date.
Tall enough and sturdy when you need a legitimate tripod for serious photography or video but, small enough to pack and versatile enough not to have to bring more than one tripod. Gets into more places than any other tripod Ive used and still small enough to put in a backpack.
The K&F 67inch can be inverted so close to the ground shots are no problem and you can hang a weight or bag from the center post when you need more stability for standard shots. The vertical option is really the game changer here. It allows you to reach over the spread of the tripod to get close on product shots or wedding shots like rings close ups while still allowing you to shoot and unobstructed straight down shot if necessary, very cool!
And after all that, one of the legs can be unscrewed to become a fully functional monopod or even a sound boom pole in a pinch.
The build quality is what you would expect from a quality manufacturer and the included bag is the best I've seen from any manufacturer to date.
10/03/2026
Click to play video
I loved how versatile the tripod is; the overhead view option is wonderful for doing all sorts of things. The monopod is quite good, and it's so compact when stored. 10/10.
I loved how versatile the tripod is; the overhead view option is wonderful for doing all sorts of things. The monopod is quite good, and it's so compact when stored. 10/10.
28/02/2026
Excellent product, good quality and design. It comes with a medium-quality carrying bag and a key. The tripod measures approximately 42 cm when closed for transport, and its minimum height is about 56 cm. Its maximum height is 1.70 m. At higher heights, stability decreases. I recommend using a counterweight to keep it stable and prevent the ball bearing from falling over, as it could tip over even when tightened. The maximum weight capacity is 10 kg, but you should always use 2 kg less to prevent it from falling over or breaking due to the weight.
If this is your first tripod, it's definitely worth being careful with the wheels and not overtightening them, as they could break. Just turn them when you reach the end and don't tighten them. The rubber feet will wear down over time, so don't be surprised when they break. Even so, it's a pretty good model, and I consider it a mid-range option between their longer, larger, and more expensive 2-meter model and their smaller 1.30-meter model. This one is in between. It weighs 1,690 grams and is made of aluminum. I highly recommend it, but keep in mind that it will eventually wear out because each joint where the ball joints are located will wear down with use. This is just an observation. I highly recommend it.
If this is your first tripod, it's definitely worth being careful with the wheels and not overtightening them, as they could break. Just turn them when you reach the end and don't tighten them. The rubber feet will wear down over time, so don't be surprised when they break. Even so, it's a pretty good model, and I consider it a mid-range option between their longer, larger, and more expensive 2-meter model and their smaller 1.30-meter model. This one is in between. It weighs 1,690 grams and is made of aluminum. I highly recommend it, but keep in mind that it will eventually wear out because each joint where the ball joints are located will wear down with use. This is just an observation. I highly recommend it.
24/02/2026
The product's versatility is the best thing about it.
20/02/2026
I liked its sturdiness and precision; it adjusts perfectly to every movement and doesn't shift. It's suitable for wearing for many hours of walking, though I think it might not be as light as I expected! But I liked it.
15/02/2026

































