My intent was to use this suction cup mount with my GoPro Hero 13, which I use to take video of weather events by placing the camera in an upper-level window. I also use this in my car to take video from a 3rd-party perspective. I must first note that the suction cup is not just soft rubber, but extremely sticky, to the point where removing it from a window is quite the workout. This may sound like a problem, but it is one of the things I love the most about this, as it instills 100% confidence that it will not come off. I am very confident that I could use this on the outside of my car, but that is not a normal use case for me, and I dare not risk my camera to prove a point that does not apply to me.

The device provides a standard camera mount threaded screw that took 2 seconds to screw into the camera and I was in business. The ABS material is very sturdy, offering great rigidity. It also has an angle adjustment and a compression ring to ensure the camera does not move.

While advertised as a mount for the DJI Osmo Pocket 3, the device can be used with any camera that has a standard 1/4"-20 screw hole, which is just about every single purpose built camera.

I strongly recommend this device, as it is very robust, solid and secure.

I ordered this K&F Concept suction cup mount to get some stable driving footage with my Osmo Pocket 3. I've used a lot of K&F gear and have generally found it to be a good balance of quality and price.

✨ My first impression is that this thing is built to last. It's made of a heavy, dense plastic that feels much more durable than some other mounts I've handled. I especially appreciate that the main locking lever and the ball head screw are substantial and provide a lot of clamping force. It just feels like a solid piece of professional gear.

✨ In terms of performance, the suction is fantastic. I cleaned a spot on my car's windshield, pressed the cup down, and locked the lever. It grabbed on tight and didn't budge. It stays in place like it's supposed to, unlike inferior alternatives I've used in the past that vibrate loose or fall off after a few minutes. This one feels like it could hold on for days.

✨ My only minor complaint is with the ball head adjustment. While it holds securely once you tighten it down, the tightening knob requires a good amount of force to fully lock the camera in place without any droop, especially with a heavier camera. A slightly larger, more ergonomic knob would make it a little easier to use.

**Tips & Uses**

The build quality is decent. It's mostly plastic with a few reinforcing metal parts (like some of the tightening bolts on the articulating joints). Considering it's meant to be mounted in a car, it'll likely last for quite a while. The arm comes in two parts, the mounted base and the camera holding mechanism. The two are joined by one of those standard camera mounts. This is actually ideal because it means you could potentially get a more specialized mount for whichever camera you decide to use so long as it uses one of these standard threaded attachments.

I’m really impressed with the K&F Concept Suction Cup Mount for my DJI Osmo Pocket 3! The suction is incredibly strong—I mounted it to my car’s windshield and dash with zero slipping, even on bumpy roads. The build quality feels premium and sturdy, and it holds my camera securely in place. I love that it’s compatible with so many models, including my GoPro Hero and Insta360. Super easy to adjust angles for the perfect shot. If you need a reliable, affordable, and rock-solid mount for car vlogging or action shots, this is the one to get! Highly recommended.

The suction cup mount itself is fine. Works like a champ. Has good strong adhesion to flat smooth surfaces. The included accessories for the Osmo Pocket 3 are just super thin plastic and not durable. I won’t be using those and will just thread directly into my mount instead. In a pinch they’re absolutely fine but i fear they’ll get destroyed in my bag. The arm provides a nice bit of extension away from the wall and full rotational adjustability. While the accessories were a bit lackluster, the value for the mount overall is still really good given its low price point.

This is a sturdy mount that can be attached securely to any flat surface. It also can be adjusted in almost all directions. The build quality is good except I'm not crazy the potential durability of the ball sockets. The suction cup holds well well on smooth flat surfaces such as glass. The suction cup is easy to install, simply remove the lock and pull the protruding rubber corner outwards and the holder is off. The 1/4" screw can attach to most cameras but there is an adapter for the DJI Pocket camera.

Overall in all, a good solution for having a stable mount in a car, boat or even a glass window. This is a good item to have for expanding the uses of your action camera.

This K&F Concept suction mount is well-engineered and dependable. I used it with my Osmo Pocket 3 and also tested it with a GoPro — both held steady with zero wobble, even on rougher roads. The suction is strong, the adjustments are smooth, and the whole setup feels solid and professional. It’s a great option for dashboard or windshield shots without worrying about the camera coming loose.
Dr. T. highly recommends this product!!

The holder comes with a number of accessories and is well packaged. I use it to run an Ace Pro 2 or X4 in dash cam mode and it works perfectly.
The suction cup holds so well, even on the curved center console and thanks to the two joints, you can adjust it really well and flexibly.
Even with the extremely hot temperatures of the last few weeks, nothing has moved or dissolved or melted in any way and it never seemed unsafe or dangerous to me.
That's why I like to give it 5 stars because I'm absolutely satisfied.

I've tried the K&F Concept suction cup mount for my DJI Osmo Pocket 3 and Insta360 Ace Pro and am satisfied with the workmanship and function. The holder feels sturdy and the suction cup is easy to attach to smooth surfaces. When used on my windshield, it holds reliably, even when things get a bit bumpy. The angle adjustment options are practical to optimally orient the camera.

I also appreciate that it is reusable and easy to clean after use. The accessories are complete and the assembly was easy. For the price, the mount seems to be a suitable solution if you want to flexibly mount your device in different places. Overall, a solid option that serves its purpose.

Works great and holds steady. The suction is strong and easy to lock in place. Perfect for mounting my pocket 3 on the windshield or dash. No issues so far.