I usually don’t use adhesive mounts, but K&F Concept is a brand I trust—and the fact that they use genuine 3M sticky pads gave me confidence that these would hold up.The packaging feels premium, and everything comes individually wrapped. Inside, you’ll get three flexible adhesive mounts with protective film over the adhesive (remember: single use only), plus a GoPro-style adapter, a 1/4" thread adapter, and a locking screw for each mount.I plan to use these with my Insta360 X5 in creative setups—like attaching to photography gear, bikes, skateboards, and even my motorcycle helmet. The flexible base really helps it contour to curved surfaces, and it feels more secure than cheaper knockoffs I’ve seen.For under $25, this is a great value. Unless they fail (and I’ll update if they do), I’m really impressed with how sturdy and well-made these feel. Looking forward to capturing some unique footage with them!

Used as a phone holder in my vehicle, the adhesion is very good and road vibrations are well absorbed. Very practical product when other fixing methods are not possible.

The material of the holders (set of 3) is of very good quality. It feels firm and has a strong adhesive that adapts well to the curved shape of the helmet. I've tried it on various surfaces (on Lego car for interior shots with Insta 360) and it doesn't peel off when moving or over time. The base is slightly flexible, which improves grip without sacrificing stability. It is only necessary to thoroughly clean the surface. Then stick on the base and leave it for a few hours so that the adhesive hardens well and adapts. Once installed, the support is very securely attached My conclusion: A reliable product, easy to install and very useful for anyone who picks up on the go. The adhesive is strong, the base is flexible and the bracket is sturdy. Excellent price/quality ratio. Highly recommended for anyone who wants to shoot from a helmet without complications. I would buy this product again at any time.

Also used in fresh and seawater, very solid. I recommend it!

If you need a mount to stick your cameras to surfaces like a motorcycle or a helmet, maybe that's what you need. The packaging is very good as usual with the brand and very good impression on the quality of the materials, the base is simple and the adhesive is strong. The overall quality of the rest is very good, the plastics are not thin and are not too rigid or too soft. In short, it's very good for small cameras but I would never put on too much weight regardless of the quality with this kind of support!

This set of 3 flexible helmet mounts from K&F Concept immediately makes a sophisticated and robust impression. The base is made of flexible TPU material and is significantly larger than classic GoPro adhesive pads. As a result, it adapts better to curved helmet shapes and offers significantly stronger grip, exactly what you want for sports activities such as skiing, MTB or motorcycling! The adhesive surface is absolutely secure and gives you noticeably more confidence than many standard solutions. I have not yet tested them in practice in wind and weather (only when the sun is shining), but the workmanship and the generous contact area suggest that they will last reliably even under load. The 180° swivel module allows precise adjustment of the shooting angle and makes creative perspectives easy to implement. The scope of delivery is also positively noteworthy: 
In addition to the adhesive pads, there are matching 1/4 inch adapters and screws, making the set easily compatible with Insta360, GoPro or DJI action cams. 
Everything looks solid and well coordinated. According to the manufacturer, residues are not expected when removed, which will be seen the next time you use them. My conclusion: 
Anyone who has ever lost or damaged classic helmet mounts will immediately notice the difference. These brackets offer more space, more grip and more flexibility. For me, a well-thought-out upgrade with high suitability for everyday use.

 4 out of 5 stars, as long-term experience is still pending! 


I was in need of adhesive mounts for my cameras, but the standard flat and curved ones you can get everywhere didn't have the right kind of curve to them to allow them to stick to my kayak. Thankfully these flexible mounts can be moulded into any kind of angle (within reason, of course) and stuck down.They moulded perfectly to my kayak hull - my secret tip here is to warm them up using a hairdryer first which allows the black plastic to mould easier, so when it cools it will cool in the right shape too. They have held my 360 camera on a long pole as well, so I'm happy they are super sticky and strong.

I said I'd never have a crash helmet mounted camera and always had the GoPro and Virb mounted on the bikes but I've gone and changed my mind! I decided to go for this K&F Concept twin pack of crash helmet camera mounts for a couple of reasons, the first and most obvious reason is because both me and my partner ride motorcycles but more importantly I already use several K&F products both on the bikes and also for my photography hobby/interest and have been very impressed with the quality, functionality and price of them.From a safety point of view a helmet mounted camera just makes more sense, it's definitely more visible to other road users and as such if a driver sees that you have the camera they seem to behave that little bit better around the bikes. Despite our cameras having built in correction options they still didn't give the best results when bike mounted, the fact that they were fixed position also limited the field of view and we noticed that a lot of stuff on our journeys didn't get picked up that well. The K&F helmet mounts also remove the camera shake that we used to get and we find along with the safety benefits from the cameras being more visible that the footage is better quality and much more interesting when played back, especially when we've been on scenic rides.With two quality mounts in the pack the £17.99 purchase price is very reasonable, of course you don't have to use these solely as helmet mounts as they can be mounted on any clean, flat or contoured surface!These are another excellent quality and superbly priced product from the folks at K&F, if you've not checked their store out it really is worth going and having a look as there is a lot of well made and well priced equipment in it.A definite five out of five stars for this excellent product.

Arrived in a cardboard box, inside you will find: ▷ 2 soft rubber plate supports with adhesive ▷ 2 joints with tightening screw Chosen to be able to attach a cell phone holder compatible with the screw thread, I must say that it fits perfectly. The plate has the right softness and flexibility to be attached to curved surfaces and fits well. The plastic of the joint is robust compared to other similar products that can be found. The tightening of the bolt to be screwed in turns out to be good.

This flexible adhesive mounting kit from K&F Concept has proved to be an excellent option for those of us who use action cameras in helmets, whether for cycling, motorcycles, extreme sports or POV recordings. The material is of very good quality: resistant, firm to the touch and with a powerful adhesive that adapts well to the curved shape of the helmet. I have tried it on different surfaces and it doesn't peel off with movement or with the passage of time. In addition, the base is slightly flexible, which helps improve grip without compromising stability. The package arrived well sealed and protected, with all the accessories included: the adhesive base, adjustment screws and the adapter for the camera. Everything was in perfect condition and ready to use. The assembly is very simple: you just have to clean the surface of the helmet thoroughly, apply the base and let it sit for a few hours for the adhesive to set well. Once placed, the support is very secure and does not move either with vibrations or with the wind. It is compatible with most GoPro, Insta360, DJI Osmo Action and similar cameras. Conclusion: A reliable product, easy to install and very useful for those who record on the move. The adhesive is strong, the base is flexible and the mount is stable. Excellent quality-price ratio. Highly recommended for those looking to record from the helmet without complications.