How To Take Off Camera Lens?

Changing lenses on your DSLR

One of the advantages of digital SLR (single-lens reflex) cameras is the ability to use a variety of different lenses. Changing lenses on your DSLR isn't difficult, but there are good ways and not so good waysof goingabout it. Here are a few things to keep in mind when changing lenses.

• Before attempting to mount or dismount a lens, make sure the camera's power is turned to the "off" position.
• To mount a lens, match up the mounting index dots on the lens and camera body, insert the base of the lens into the mount and then turn the lens counterclockwise until it locks in place.
• Pressing the lens release button on the body and turning the lens about a quarter turn clockwise will remove it.

Lens mounting sequence

Anytime you change the lens on an SLR, you risk letting dust enter the camera. That dust can settle on the low-pass filter which is directly in front ofthe image sensor and can result in what looks like smudges or black or gray dots on your photos.

• To minimize the chance of that happening, you want to expose the inside of the camera body as little as possible when changing lenses.
• That means having the lens you want to put on the camera ready to go before you take the current lens off the camera.
• Again, make sure you turn the camera's power off before changing the lens as the image sensor itself generates a static electric charge that can attract dust.
• If you are using a VR (Vibration Reduction) lens, you will also want to turn the VR switch on the lens barrel to "off".
• Next, shield your camera by turning your back to the wind, rain or dust that could possibly blowinto the camera.

When handling a lens, grasp the lens barrel and avoid touching the front or rear elements to prevent fingerprints. Get in the habit of always using front and rear lens caps to further protect the lens elements. Practice changing lenses at home to become efficient at doing it quickly and easily.

Ring and red dot release

this canon t70 camera just arrived (it's my first film camera), i love it, but i have no clue how to take the lens off since the person i got it from must have changed it, because it doesn't match at all the lenses in videos about the camera. in the videos, the people just take it off by holding a button on like the lense "thingy" and rotating it, however, this lense doesn't have any buttons like the ones in the videos.

• so, the ring on the lens closest to the body of the camera has a red dot on it.
• on the body of the camera, right underneath the "n" in canon, there's a red dot.
• now look at the ring with the red dot on it, there might be a button on it, that button releases the lock, but there might not be a button, some lenses had them, some don't.
• if there's a button, press it and hold it down.
• then rotate that ring counter-clockwise until the two red dots line up, the lens should release then.

if it's an fd lens, they should all remove the same way.

not quite. there's also the earlier breech-lock fd lenses that don't remove quite the same way. there's no button with those.

i solved it. yeah, it does have a similar one, just on a different spot on the lens and looks a little different, but works the same way

Stuck lens before repair shop

i dropped my lens now the front is stuck. can i fix it myself?

lens stuck on camera. any tips before going to the repair shop?

• hit it with some canned air around the cracks.
• get a plastic spudger with a little angle.
• wedge the spudger gently between each crack between elements to try and give it some room to open/bend something misaligned into an okay spot.
• can also try using the spudger to gently pull out the very front the very front while turning on.
• (not the delicate lens cover but the flap connected to the lens on the top and bottom).
• i got my lumix tz60 back to life this way.

this camera will need to be repaired or replaced. it might be something simple. it might be something complicated. either way, i'd send it to sony and ask if anything can be done. but be prepared to buy a new camera.

Camera lens protector removal

wondering how to remove camera lens protector without damaging your lens? well, this article explains that in a very simple and professional way, so that you can do it the right way.

camera lenses have evolved to be resilient and capable over the years, but let’s face it, they are still quite fragile pieces of equipment, especially their front lens area. to protect them, people use a lens protector, also called a screen protector or lens filter. these are made from a thin layer of glass or optical resin and function to protect your lens’s actual glass layer.

this sounds nice, but once this protector needs to be replaced when there are visible signs of cracks or due to common problems of dust or haze trapped between the lens and filter. when this happens, many people search for how to remove the camera lens protector at that time. well, it’s not that simple, and newbies, when doing so, can seriously damage the outer layer of glass.

to do this professionally, you will need a microfiber cloth, a plastic spudger or rubber lens wrench, a lens blower or soft brush, and isopropyl alcohol. this is how to remove camera lens protector without damaging your hardware.

1. first, take a high-quality microfiber cloth and wipe off dust and dirt from the protector’s surface using this cloth. this wiping will prevent further debris from scratching the lens during this removal process.
2. now gently insert a plastic pry tool (you can also use a guitar pick) under one corner of the lens protector. if you feel that the protector is firmly stuck, then you have to make it soft.
3. to do that, use a hairdryer on a low or medium heat setting while holding the dryer about 6-8 inches away and move it in a circular motion for 10-30 seconds. this will gently warm the adhesive of this protector, leading to softening of the glue. avoid using any kind of metal tools during this step, as they can permanently scratch the lens.
4. once you can lift the corner, then use your fingers to peel the lens protector, making sure to do this steadily and slowly. too much force or sudden twisting motions can easily damage the lens, so be careful with this step.
5. if you are using screw-on filters, then start by unscrewing counterclockwise. to do that, you can use a rubber jar opener or a lens wrench if it’s stuck with gentle force.
6. when the lens is removed, look for any adhesive residue and clean it with isopropyl solution. once done, use a fresh cloth afterward to clean the lens.

we recommend always doing this process in a place that is dust-free, as removing such a lens filter and replacing it with a new one in a dusty space will catch dust particles between the lens filter and the lens itself. moreover, using a lens hood and lens cap will increase the life of these lens filters/protectors.

Protector removal by card, needle, tweezers, or floss

• you could use pretty much anything to take it off actually. those lenses can’t be scraped by something steel so i would just use a pocket knife and just kinda stab into it at an angle and lift up. that should pull the entire “protector” without scraping the camera.
• apple has been making camera lenses pretty durable for a while now. you should be all good to grab a knife and peel it off, but you can also feel free to just try to pick at it with a plastic guitar pick or something similar.
• @osex it work. i manage to removed it. thank you for the advise...though i probably scratch the side but i don't know. and i use a laminated card. thank you.
• it seemed risky but i was able to successfully remove mine with a needle.. i just poked in right in the middle of the protector and lens just enough to lift it up not so deep. and it just popped off. hope this helped
• tweezers! warmed lenses slightly with hair dryer and the screwed them off.
• i was scared of scratching my lens and the thought of using floss and worked perfectly. i just slid the floss on the side of the protector and it popped right off. i would recommend if you’re scared of scratching your lens. :))