Kentfaith Deals Today Most Wished For Bayonet Mount Lens Adapters Kentfaith is committed to creating the ideal Bayonet Mount Lens Adapters envisioned by users, redefining the Bayonet Mount Lens Adapters experience through exquisite craftsmanship. To meet your most desired perfect choice, enjoy today's promotion.
K&F Concept Canon ES65B bayonet hood, with a vacuum cleaning cloth *1, for RF 50mm F1.8STM lens
Most Wished For
-Compatible: Compatible with Canon RF 50mm F1.8 STM Lens, Replacement for ES-65B Lens Hood.
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 43mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price $12.99
Discounted Price $12.99
Total Save $0.00
BETAFPV Aquila16 FPV Drone Kit with LiteRadio 2 SE Transmitter, VR03 Goggles, 3 Flight Modes, Supported 1S RTF Kit for Beginner to Fly Indoor & Outdoor ELRS V3, with 6 Batteries and 1 6-Port Battery Charger & 6 Adapters
Most Wished For
-<b>8Mins Flight:</b>The Aquila16 FPV Drone Kit comes with a default 1100mAh battery, ideal for beginners seeking a smooth flying experience in N/S mode, it offers a flight time of 8 minutes and a maximum flight distance of 200 meters indoors or outdoors. Pilots also can use the 650mAh battery which is exclusive for the Aquila16 in M mode (The 650mAh needs to order separately)
-<b>Video & Goggles:</b>Aquila16 FPV Kit includes VR03 FPV Goggles with video recording, wide compatibility with mainstream Analog VTXs, and a 4.3-inch 800×480px HD bright LCD. Paired with a 350mW high-power, low-latency video transmission system, the fpv drone with goggles delivers stable real-time signals up to 200m via a 5.8G 3dBi omnidirectional antenna for crisp, vivid imagery.
-<b>Signal about the Camera:</b>After a few times of use, the cable about the fpv drone camera may loose when crashing or hitting often and then lost the signal and image on the goggles, please plug and unplug the cable of the camera if the drone or the goggles lost the signal and check the goggles whether is full charger
-<b>LiteRadio 2 SE Transmitter:</b>Preloaded with factory-default ELRS V3 firmware for extended range, the transmitter of the fpv drone kit integrates BETAFPV's custom LiteRadio System—enabling one-click joystick calibration and on-device firmware updates for enhanced usability. It also doubles as a USB controller for FPV simulators, letting pilots practice risk-free before real flights.
-<b>Flight Modes:</b>The Aquila16 Brushless Quadcopter offers N/S/M 3 flight modes and supports 3 different speeds with SLOW/MID/FAST. With Turtle Mode, no burden to fly away, and there is no need to walk away to correct the position manually to flip it over and resume flying when the beginner fpv drone falls to the ground and upside down. But please note that the position hold function is only available in N mode
Original Price $449.99
Discounted Price $359.99
Total Save $90.00
K&F Concept Canon ES68 II bayonet hood with a vacuum cleaning cloth *1 for Canon EF 50mm f/ 1.8STM lenses
Most Wished For
-Compatible: Compatible with Canon EF 50mm f/1.8 STM Lens, Replacement for ES-68 II Lens Hood
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 49mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price $8.99
Discounted Price $8.99
Total Save $0.00
K&F Concept Canon EW73D bayonet hood, with a vacuum cleaning cloth *1, for RF 24-105mm F4-7.1 is STM,EF-S 18-135mm f/3.5-5.6 IS USM lenses
Most Wished For
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 67mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price $8.99
Discounted Price $8.99
Total Save $0.00
K&F Concept Canon EW53 bayonet hood with a vacuum cleaning cloth *1, suitable for EF-M 15-45 mm f/3.5-6.3 IS STM; RF-S 18-45 mm f/4.5-6.3 IS STM and other lenses
Most Wished For
-Compatible: Compatible with Canon EF-M 15-45mm f/3.5-6.3 is STM & RF-S 18-45mm f/4.5-6.3 is STM Lens, Replacement for EW-53 Lens Hood.
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 49mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price $7.99
Discounted Price $7.99
Total Save $0.00
K&F Concept Canon EW63C bayonet hood, with a vacuum cleaning cloth *1, suitable for RF 24-50mm f/4.5-6.3 IS STM; EF-S 18-55mm f/3.5-5.6 IS STM; EF-S 18-55mm f/4-5.6 IS STM and other lenses
Most Wished For
-Compatible: Compatible with Canon RF 24-50mm f/4.5-6.3 IS STM; EF-S 18-55mm f/3.5-5.6 IS STM; EF-S 18-55mm f/4-5.6 IS STM Lens, Replacement for EW-63C Lens Hood.[NOT COMPATIBLE]: NOT COMPATIBLE WITH EF-S 18- 55 mm f/3.5-5.6 IS II
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 58mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price $8.99
Discounted Price $8.99
Total Save $0.00
Minolta MD Mount Lens to Micro 4/3 Mount Camera Lens Mount Adapter
Most Wished For
-Allow Minolta MD MC mount lenses used on Micro 4 3 MFT mount camera body.
-Compatible with Micro Four Thirds (M4/3) camera includes: Panasonic Lumix G1, GH1, GF1, G10, G2, GH2, GF2, G3, GF3, GX1, GF5, G5, GH3, GF6, G6, GX7, GX80/GX85/GX7 Mark II, GM1, GH4, GM5, GF7, G7, GX8, G85/G80, DC-GH5, DC-G9; Olympus PEN E-P1, E-P2, E-PL1, E-PL1s, E-PL2, E-P3, E-PL3, E-PM1, E-PL5, E-PM2, E-P5, E-PL6, E-PL7, PEN-F, E-PL8; Olympus OM-D E-M5, E-M1, E-M10, E-M5 II, E-M10 Mark II, E-M1 Mark II, JVC GY-LS300 S35 mm Camcorder, DJI Zenmuse X5, Kodak Pixpro S-1, Blackmagic Pocket Cinema Camera etc.
-Made of brass and aluminum. Stable, precise and durable construction. Manually operated.Infinity focus allowed.
-For heavy medium format lenses, we suggest to use with a telephoto bracket and a tripod to balance its weight when shoot.
Original Price $53.99
Discounted Price $27.99
Total Save $26.00
NIK Mount Lens to Fujifilm FX Mount Camera Adapter for Fujifilm FX Mount Camera K&F Concept Lens Mount Adapter
Most Wished For
-Allow Nikon F mount lenses used on Fujifilm X series camera body.
-Compatible with Fujifilm camera includes: Fuji X-A1, X-A2, X-A3, X-E1, X-E2, X-E3, X-M1, X-Pro1, X-Pro2, X-S1, X-T1, X-T10, X-T20, X-T2, X10, X20, X30, XF1, XQ1, XQ2 etc.
-Made of brass and aluminum. Stable,precise and durable construction.Manually operated.Infinity focus allowed.
-For heavy medium format lenses, we suggest to use with a telephoto bracket and a tripod to balance its weight when shoot.
-30 Days No Reason Return,12 months quality guarantee,100% satisfaction assurance. Please note Infinity focus position: the position of the infinity mark 【∞】of the telephoto lens or super-telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
Original Price $45.99
Discounted Price $28.99
Total Save $17.00
Lens Mount Adapter Compatible for Leica R Mount Lens to Sony E-Mount NEX Body Adapter
Most Wished For
-Allow Leica R mount lenses used on Sony E NEX/Alpha camera body.
-Compatible with Sony E NEX/Alpha camera includes: Sony NEX-3, NEX-3C, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3, NEX-VG10, a7, a7R, a9, a3000, a3500, a5000, a5100, a6000, a6300, a6500, a7S, a7 II, a7S II, a7R II, a7R III etc.
-Made of brass and aluminum. Stable,precise and durable construction.Manually operated.Infinity focus allowed.
-For heavy medium format lenses, we suggest to use with a telephoto bracket and a tripod to balance its weight when shoot.
-30 Days No Reason Return,12 months quality guarantee,100% satisfaction assurance.
Original Price $43.99
Discounted Price $23.99
Total Save $20.00
PL-RF Mount Lens Adapter, Compatible with PL Mount Lens Converter to RF Mount Cameras Adapter
Most Wished For
-Features:Manual adapter, supports infinity focus. Does not support automatic aperture/autofocus.
-Adapter:PL lens adapter for E-mount camera bodies, enabling seamless adaptation of PL lenses to E-mount camera bodies to change your shooting results.
-Material: Constructed with hard-anodized aluminum alloy, featuring matte lacquer interior finish
-Application: Compatible with Canon EOS R6, EOS R50, EOS R100, EOS R3, EOS R5C, EOS R5, EOS R6 Mark II, EOS RP, EOS 7, EOS 10, EOS RP cameras.
-Compatibility: Compatibility with LUMIX S1R/LUMIX S1/LUMIX S52/LUMIX S52X/LUMIX S9, Sigma fp/Sigma fp L
Original Price $89.99
Discounted Price $89.99
Total Save $0.00
New Arrival
About Us

ABOUT KENTFAITH

-Enjoy Your Selected Digital Life

KentFaith as an end-consumer service provider, kentFaith is committed to improving consumer experience and providing consumers with the most suitable products. We have 150 patents and have won international product awards. We are popular in 200 countries and regions. We have been listening to the real needs of users and are committed to creating an ideal choice that meets your inner expectations and providing you with a convenient and practical exclusive shopping page.

20K + Products
56+ Countries and Regions
20Million+ Customers
150+ Patents
260+ Commercial Partners
1200+ Online and offine Retailers
20000+ Products